• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Gear drive on a fox???

  • Thread starter Thread starter superslothguy
  • Start date Start date Mar 6, 2006
S

superslothguy

Member
Apr 1, 2005
103
0
16
Mar 6, 2006
#1
  • Mar 6, 2006
  • #1
has anyone done a gear drive setup on there car? i will be doing a cam swap soon and was thinking of ditching the timing chain. i noticed it says "minior machine work may be needed" What dose this mean cause i wanted to leave the engine in the car lol
so if anyone has done this please give me some info and tips and pictures if you have any? thanks
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Mar 6, 2006
#2
  • Mar 6, 2006
  • #2
Try a search for gear drive if you haven't already. I remember searching for that a few months ago to see if anyone had done it, and found enough info. to convince me to not do it. I love the sound of them, but hate the idea of pulling the damn timing cover to do it.
 
S

superslothguy

Member
Apr 1, 2005
103
0
16
Mar 6, 2006
#3
  • Mar 6, 2006
  • #3
only found stuff in rear end gears
 

sgarlic

Founding Member
Apr 21, 2001
3,085
1
56
Mar 6, 2006
#4
  • Mar 6, 2006
  • #4
Although sometimes the search function has been known to not work well, I just checked to make sure I wasn't hallucinating, and saw several threads debating gear versus chain, pros/cons, etc.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Mar 6, 2006
#5
  • Mar 6, 2006
  • #5
This topic comes up at least once a month (lately) so there is plenty of information availalbe to read up on. But the cliff notes version is this:

1) They are as loud as a S/C. No more trouble shooting rocker ticks or detonation. You won't beable to hear very much under the hood

2) The solid connection between the crank and cam will transmit more vibrations / harshness through the cam and effect bearing life.

Now, I have run a gear drive before. It was cool for about 1 month and then it wore out. Spend that money on a good timing chain or go to a belt drive.
 
You must log in or register to reply here.

Similar threads

H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
427
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
895
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
329
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
M
4.10 gears = 200,000 miles ?
  • michaelleewebb
  • Apr 1, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
409
SN95 V6 Mustang Tech Apr 2, 2026
michaelleewebb
M
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
732
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?