• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

gear ratio 3:55 or 3:73

  • Thread starter Thread starter MarcMonteverde
  • Start date Start date Sep 18, 2007

MarcMonteverde

New Member
Sep 4, 2006
66
0
0
S@c-ToWn
Sep 18, 2007
#1
  • Sep 18, 2007
  • #1
what gear ratio is better? i want to have some good 1st 2nd 3rd, but yet still have good top end, i like to play on the freeway more than i do off the line,
i heard 3:73 have good bottom end but the top end isnt really there, ive also heard that 3:55 are good for bottom end too but its a really a top end ratio. id just thought id ask...

thanks
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Sep 18, 2007
#2
  • Sep 18, 2007
  • #2
i'd go 3.73's. they're so close it almost wouldn't matter but 3.73's are just a better gear for non-forced induction cars, imo.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Sep 18, 2007
#3
  • Sep 18, 2007
  • #3
What do you have done to your car. Honestly, if you like to play around on the highway...then 3.55's are probably a little better. I can only get about 110 out of 4th gear with my 3.73's without revving too much. 3.55's will get you up to about 115. Like cenok said...the difference is minimal...about 250 rpms on the highway.
 

MarcMonteverde

New Member
Sep 4, 2006
66
0
0
S@c-ToWn
Sep 18, 2007
#4
  • Sep 18, 2007
  • #4
i got GT-40 heads
, GT-40 manifold(98 explorer not yet installed)
,BBK 70mm throttle,BBK 70mm EGR spacer
70mm Cobra mass air meter
18' Electric fan
BBK cold air, BBK headers, BBK off Road h pipe,
Flowmasters 2 chamber
King Cobra Clutch,BBK adjustable Clutch cable,
MSD 6a box,MDS coil,
BBK 110 fuel pump
1inch spacer,A/C delete,
Hurst Short throw shifter, Mass Air Coverison
its an 1987 mustang GT

i already have a complete rear end with 3:73 i got for 100$$ but i was think about changin the gear ratio..but im not sure
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Sep 18, 2007
#5
  • Sep 18, 2007
  • #5
If its a 5 speed car I think you might like 3.55's better. I went from stock gears to 3.73's a few years back and it made a huge differnce in the feel of the car, but in the 1/4 mile I am about out of power in 4th gear as I run through the traps. I am thinking about backing down to a 3.55 set, with the 3.73's 1st and 2nd gear will just blow street tires out and spin.
 

MarcMonteverde

New Member
Sep 4, 2006
66
0
0
S@c-ToWn
Sep 18, 2007
#6
  • Sep 18, 2007
  • #6
i know my friend has 3:73 and i swear 1st gear is almost all burn out, he cant hold traction for nothing, i mean it feel strong but im not sure what to go with...
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 18, 2007
#7
  • Sep 18, 2007
  • #7
Either one should be a nice gain They are very close in revolutions per minute and gear limitations...
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Sep 18, 2007
#8
  • Sep 18, 2007
  • #8
MarcMonteverde said:
i know my friend has 3:73 and i swear 1st gear is almost all burn out, he cant hold traction for nothing, i mean it feel strong but im not sure what to go with...
Click to expand...

Yeah that's how mine is, even with Nitto 555R drag radials 1st and 2nd gear will get loose...not nearly as bad as it used to with street tires

I feel like I could actually get out of the hole better with a little less gear, again, that could be just me though.

Like said above, either will speed up your car.
 

MarcMonteverde

New Member
Sep 4, 2006
66
0
0
S@c-ToWn
Sep 18, 2007
#9
  • Sep 18, 2007
  • #9
ya i think im gonna go with the 3:55 just cuz alot of time i usally on the freeway when i mess around i mean not to say i dont play from light to light
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Sep 18, 2007
#10
  • Sep 18, 2007
  • #10
ninety15.0 said:
What do you have done to your car. Honestly, if you like to play around on the highway...then 3.55's are probably a little better. I can only get about 110 out of 4th gear with my 3.73's without revving too much. 3.55's will get you up to about 115. Like cenok said...the difference is minimal...about 250 rpms on the highway.
Click to expand...

+1. My notch has 245-45-R17's with a 3.73 gears and a stock T-5. At 80 I am at 3,000RPM's.

Go with 3.55's. 250RPM's doesn't sound like much, but it is. I can feel the smoothness change if I am crusin at 3,500 RPM's vs. 3,750-3,800RPM's.
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Sep 18, 2007
#11
  • Sep 18, 2007
  • #11
Yeah, I hate when I'm on the interstate and running 2900 rpm with the cruise on. 250 Rpm lower would be a little nicer.
 

MarcMonteverde

New Member
Sep 4, 2006
66
0
0
S@c-ToWn
Sep 18, 2007
#12
  • Sep 18, 2007
  • #12
okay good lookin! now i just gotta take my rear end to the gear shop so they can change em good thing i didnt put the rear end in yet
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Sep 18, 2007
#13
  • Sep 18, 2007
  • #13
SVT32VDOHC said:
Go with 3.55's. 250RPM's doesn't sound like much, but it is. I can feel the smoothness change if I am crusin at 3,500 RPM's vs. 3,750-3,800RPM's.
Click to expand...

I agree with that completely

Anytime I think about going with 4.10:1 over my 3.73:1, I think of the above
 
1

1Fine89stang

New Member
Nov 22, 2006
87
0
0
Sep 18, 2007
#14
  • Sep 18, 2007
  • #14
I am running 4:10's and a 5 speed i only do about 65 on the parkway . It is cool to be able to roast em going down the parkway though. I do mostly around town driving so it isnt that bad. My only gripe is that 1st gear is basically non-existent.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Sep 18, 2007
#15
  • Sep 18, 2007
  • #15
It is cool to roast them at higher speeds but it can be very dangerous. I hate getting squirly at over 50MPH.

Also, I just wanted to add that being 25 years old now, I don't know what it is but I am more or a freeway speed freak now then I was at 17-22 years old. I always find myself driving on the freeway at 85-100MPH. I NEVER used to do that when I was younger.
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Sep 18, 2007
#16
  • Sep 18, 2007
  • #16
1Fine89stang said:
I am running 4:10's and a 5 speed i only do about 65 on the parkway . It is cool to be able to roast em going down the parkway though. I do mostly around town driving so it isnt that bad. My only gripe is that 1st gear is basically non-existent.
Click to expand...

this is exactly how i am. i do about 65 on the highway as well. about 95% of my driving is around town, so i don't mind that much.
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Sep 18, 2007
#17
  • Sep 18, 2007
  • #17
SVT32VDOHC said:
It is cool to roast them at higher speeds but it can be very dangerous. I hate getting squirly at over 50MPH.

Also, I just wanted to add that being 25 years old now, I don't know what it is but I am more or a freeway speed freak now then I was at 17-22 years old. I always find myself driving on the freeway at 85-100MPH. I NEVER used to do that when I was younger.
Click to expand...

Yeah, its cause you can afford the ticket
 

88-378

Member
Aug 10, 2007
14
2
16
Alpharetta, GA
Sep 18, 2007
#18
  • Sep 18, 2007
  • #18
Check what ratio your tranny has. Or if you intend to upgrade it in the future. I have a 3550 and my 3:73's are actually like around 3:60 something for 1st thru 3rd because of the tranny ratios. I think!
 

Wallzy

New Member
Aug 20, 2006
128
0
0
Orlando, FL
Sep 18, 2007
#19
  • Sep 18, 2007
  • #19
I like the 3.55's, i had 3.73's and the 3.55's are much smoother, i didn't seen any difference at the track - was still running about the same time and i didn't have to shift near the end any more.
 

MarcMonteverde

New Member
Sep 4, 2006
66
0
0
S@c-ToWn
Sep 18, 2007
#20
  • Sep 18, 2007
  • #20
i actually do more freeway than i do anything else, i dunno its just fun to go from 65- to like 120, lol gotta love that v8 power! haha
 
You must log in or register to reply here.

Similar threads

Drivetrain 5th Gear Ratio
  • PonyGTrider
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
33
Views
1K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Q
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
753
Fox 5.0 Mustang Tech Jun 14, 2026
Mindseye007
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
255
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
715
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
299
The Welcome Wagon Oct 19, 2025
Clutchfork
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?