• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

gear slippin

  • Thread starter Thread starter bobbyd
  • Start date Start date May 15, 2007

bobbyd

New Member
Sep 8, 2004
312
0
0
San Antonio/Los Angeles
May 15, 2007
#1
  • May 15, 2007
  • #1
hey guys I have a problem with my car this car had been sitting for about 2 years give or take and I took it out for a drive the other day and i noticed that either 2nd or 3rd gear slips. can this be due since the car hasnt been driven in that long? if so what can i do to fix this? today i added some lucas oil that helps with leaks,slips and grinds. should that be enough?

ps - i took it out for a drive today about 1-2hours after i added the lucas oil and it was still slipping maybe it has to sit longer?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 15, 2007
#2
  • May 15, 2007
  • #2
So this must be a automatic? If so your oil could be contaminated. get the tranny flushed and the oil changed.
 

bobbyd

New Member
Sep 8, 2004
312
0
0
San Antonio/Los Angeles
May 15, 2007
#3
  • May 15, 2007
  • #3
86bluecobra said:
So this must be a automatic? If so your oil could be contaminated. get the tranny flushed and the oil changed.
Click to expand...

yea its a AOD. coo thats what i was going to do next to it. change both oil and tranny fluid ill try that tomorrow and see if thats the problem
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,064
3,138
204
Middle of Maine
May 15, 2007
#4
  • May 15, 2007
  • #4
Are you sure that the fluid level is correct? To low or to full can cause slipping issues also. Be sure to check in park fluid at operating temperature.
 

bobbyd

New Member
Sep 8, 2004
312
0
0
San Antonio/Los Angeles
May 15, 2007
#5
  • May 15, 2007
  • #5
Bullitt347 said:
Are you sure that the fluid level is correct? To low or to full can cause slipping issues also. Be sure to check in park fluid at operating temperature.
Click to expand...

I believe it was at level like where it says Full. but ill have to check it tomorrow since the car its a my dads buddys lot.
we took it for a spin today and I flushed the radiator and i guess i didnt tighten the water hose completely that when we got there it was dropping the anti freeze and we had to put water on it until it would stop throwing the water back (steam) hopefully nothing broke
 
You must log in or register to reply here.

Similar threads

T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
338
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
204
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech Oct 12, 2026
limp
B
2001 v6 New compressor issue
  • badmech
  • Apr 30, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
170
SN95 V6 Mustang Tech Apr 30, 2026
badmech
B
00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
244
The Welcome Wagon Aug 21, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?