Gears for 2.3

[Saleen8786]

hey guys how do i get both tires to spin in my notch do i have to change the whole rear or can i just put the gears in and that'll do it?


thanks
jim

 

[bhuff30]

limited slip differential. You can get one used from ebay, or new from places like jegs/summit ect... but you should probably have a pro install it.

 

[mikeflys1]

Get the diff, ring and pinion out of an aerostar. Its 7 1/2'' rear with trac-loc and 4.10 gears.

 

[Bearded Forever]

Get the diff, ring and pinion out of an aerostar. Its 7 1/2'' rear with trac-loc and 4.10 gears.

 

[bhuff30]

not always. Our 91 has a 7.5, but it has 3.73's and an open rear.

 

[Saleen8786]

alright so go to a junkyard and get the differential cover,ring and pinion out of a ford aerostar. Any particular yr of the aerostar or any ones. thanks guys



jim

 

[Jquintel]

Get the diff, ring and pinion out of an aerostar. Its 7 1/2'' rear with trac-loc and 4.10 gears.

So, what years ?

 

[mr_woodster]

I heard it was specific years, look up how to read differencial tag's or door-jam factory codes...both which specify what the rear has (or had) from the factory.

 

[My80Cobra]

Damn near all of them! Seriously there is a bunch. They also have 8.8's but most were 7.5's. I believe all the AWD have liimited slip, as well as the 4.0L just look they will be there..

 

[Bearded Forever]

Don't your junkyards drain the fluids?
The rear end should be visible and it's obvious what the POSI looks like.
Dumb Ford guys.