• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Gears... Help Identify

  • Thread starter Thread starter pilks
  • Start date Start date May 26, 2010

pilks

Member
Jul 15, 2004
109
0
16
May 26, 2010
#1
  • May 26, 2010
  • #1
I was under the car to install a new fuel filter. Took some pics, don't know how to read the item on the rear ......

help identify....

View attachment 218107

View attachment 218108

View attachment 218109

View attachment 218110
 

trinity_gt

10 Year Member
Jan 31, 2003
3,125
81
99
Canada
May 26, 2010
#2
  • May 26, 2010
  • #2
The pics are too small or my monitor too crappy but I can't read the details. The important info is in the bottom row. I think I can just make out an "88" in the middle of the bottom and a "7G23". I suspect the first digits on the bottom row are "327" or something like that (may vary depending on the year and ratio installed): 3.27 (327) ratio in an 8.8 (88) housing. There may be a prefix to the 88 indicating a limited slip or it may be in the ratio, like "3L27".

Post bigger, clearer pics pls.
 

pilks

Member
Jul 15, 2004
109
0
16
May 26, 2010
#3
  • May 26, 2010
  • #3









okay so i quickly went out and looked and i tried to push the tag down as much as possible. I strongly believe i have 2.73 rear gears 2L73 (trac-loc)

either way, i need some 4.10's
 
9

95PGTTech

Member
Jan 28, 2008
302
20
19
May 26, 2010
#4
  • May 26, 2010
  • #4
Only way to really tell is to drop the pan. I have the stock tag and I've been through 3.73, 4.10, 4.30, 4.56, and now back to 3.73.
 

pilks

Member
Jul 15, 2004
109
0
16
May 26, 2010
#5
  • May 26, 2010
  • #5
95PGTTech said:
Only way to really tell is to drop the pan. I have the stock tag and I've been through 3.73, 4.10, 4.30, 4.56, and now back to 3.73.
Click to expand...

Chris that you????


any recommendations on gear ratios for my car?

I had 3.73 in my 04 gt vert but i think i wanna try 4.10's

thoughts?

by the way,hows things? staying busy???
 
9

95PGTTech

Member
Jan 28, 2008
302
20
19
May 27, 2010
#6
  • May 27, 2010
  • #6
pilks said:
Chris that you????


any recommendations on gear ratios for my car?

I had 3.73 in my 04 gt vert but i think i wanna try 4.10's

thoughts?

by the way,hows things? staying busy???
Click to expand...

Staying busy. Now that I have a new job, everyone needs work. LOL.
I'd go 4.10s at your power level. FRPP brand is quietest from my experience.
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
May 27, 2010
#7
  • May 27, 2010
  • #7
95PGTTech said:
Only way to really tell is to drop the pan. I have the stock tag and I've been through 3.73, 4.10, 4.30, 4.56, and now back to 3.73.
Click to expand...
Not true, you can rotate the wheel and observe the ratio of drive shaft to wheel rotation.
 

fast97gt

Active Member
Jan 2, 2007
1,082
2
49
north carolina
May 27, 2010
#8
  • May 27, 2010
  • #8
the tag reads 273s, but like previously stated most people go cheap and dont buy a master install kit with new pan bolts and choose not to trash the old or not needed parts anymore. pull the pan, count the teeth, and do some math
 

fast97gt

Active Member
Jan 2, 2007
1,082
2
49
north carolina
May 27, 2010
#9
  • May 27, 2010
  • #9
oh and those are some purty blu springs you got ther
 
9

95PGTTech

Member
Jan 28, 2008
302
20
19
May 27, 2010
#10
  • May 27, 2010
  • #10
fast97gt said:
the tag reads 273s, but like previously stated most people go cheap and dont buy a master install kit with new pan bolts and choose not to trash the old or not needed parts anymore. pull the pan, count the teeth, and do some math
Click to expand...

FRPP gears will have the part number on the ring easily visible. The ratio is the last sequence. Most Motives I have seen are also like this. As he mentioned up top, you can also rotate the wheels and count the driveshaft turns, or vice versa.
 

fast97gt

Active Member
Jan 2, 2007
1,082
2
49
north carolina
May 27, 2010
#11
  • May 27, 2010
  • #11
I have frpp 410s and love em, and there about 4yrs old, and 50k miles of DD and some abuse
 

rdharper02

like kicking myself in the junk
10 Year Member
May 8, 2006
703
237
84
May 27, 2010
#12
  • May 27, 2010
  • #12
You dont have to drop the dif cover. (Gotta give Trinity props on this one) Jack the rearend up and place the axle on jack stands. Put the car in neutral. Get under the car and mark the drive shaft (tape, chalk..). While you are watching the driveshaft, have a friend rotate your wheel ten times. Count the number of rotations of the drive shaft while the wheel is being rotated. Once you get the number, divide by ten and you will get your gear ratio. I.E. if you have 3.55s, the driveshaft will rotate 35.5 times.
 

pilks

Member
Jul 15, 2004
109
0
16
May 27, 2010
#13
  • May 27, 2010
  • #13
okay thanks all



now one more random ass question


do these cars have a low fuel indicator light???


i swear my needle looks like its about to drop off at times and still nothing comes on. Then ill go over a bump and it looks like i put a few gallons in....

whats up with this thing

anybody???
 
D

Deleted member 38176

May 27, 2010
#14
  • May 27, 2010
  • #14
LOL my low fuel light comes on at least 3 times a week

Your bulb is just probably burned out.
 

pilks

Member
Jul 15, 2004
109
0
16
May 27, 2010
#15
  • May 27, 2010
  • #15
Nightfire said:
LOL my low fuel light comes on at least 3 times a week

Your bulb is just probably burned out.
Click to expand...

any idea where that is..... how to replace etc...
 
You must log in or register to reply here.

Similar threads

J
Help finding throttle body
  • jpmaxx
  • Apr 21, 2026
  • SN95 4.6L Mustang Tech
Replies
12
Views
251
SN95 4.6L Mustang Tech Apr 22, 2026
jpmaxx
J
Help Identifying Engine Harness Plug
  • FoxbodyRob
  • Feb 7, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
3
Views
207
2.3L (N/A & Turbo) Tech Feb 7, 2026
FoxbodyRob
A
Old Holley head identification???
  • Ar15cobra
  • Jan 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
180
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 27, 2026
AeroCoupe
D
Help Identifying cam
  • dropteeth
  • Oct 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
168
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 31, 2025
dropteeth
D
R
Flex plate and starter issues
  • RJH46
  • Jun 24, 2025
  • Other Auto Tech
Replies
19
Views
1K
Other Auto Tech Aug 19, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?