Gears Install in Mass.????

[AndyGT]

Any good shops to swap gears in my 2004GT?

 

[chuckystang]

Well Im going to MikeDezRacing for my 99 cobra next week. They seem really good.

 

[Ozz]

Dez Racing, Wzoreks, CD Performance, Gaunt Performance.

Where are you located?

 

[Milenko]

Heard Dez is the best...

 

[dark_cobra_01]

Chucky,

Let me know how the gear swap went, (vibration especially).. The IRS gear swap is a tricky thing in Cobra's and it's documented on the web quite a bit.. The 99's were infamous for vibration problems before performing a gear swap and had a tendancy to get worse once a swap was done. (FYI)

Below is a link by a guy named Joe Lynch on gear swapping an IRS and much more for a 99 cobra. The site discusses runout, proper indexing and everything he has experienced on the working on his own 99 cobra..



http://www.lx.net/jlynch/index.html




DEZ does great work from what I've seen, so hopefully it won't be an issue with a gear swap as long as he's well informed what can go wrong..



Later

-DC

 

[inphiniti]

i say follow the leader with Dezzie! dudes got quality work and hes a REAL hot **** too.. ive been there personally before, not with a car with a friend, but theyre all real nice up there and they wont try to do somethin extra just to make more if you dont want it...

so yeah, go with Dez man, nothin but the best

 

[silver1983gt5.0]

gregoires in southbridge mass is real good as well

 

[chuckystang]

thanks dark cobra for the tips, I used to have vibration problems but I had MPE put an aluminum driveshaft in and now I have none. The only thing I have right now is alot of clunking from my rearend and it is leaking. Its time for a rebuild so I figure why not throw some gears in while Im at it. I have faith in Mike's shop, so well see Ill let you know after tuesday.
thanks

 

[5.0x2]

Interested in the outcome and price as well...

 

[payupsucka]

try out mpe in taunton there pretty cheap and and chris is mad cool too

 

[showstopper2]

Dez all the way....... right price and he's a class act! I have been to most of the local shops now and his is the only one to have my return business.

 

[stangpride5.0]

id go to leonard performance i get hookd up pretty siccck there and eddy is prertty ****n cool. mpe is ok but i mena do u really wanna go to a place where theyr name stands for mustang parts expensive hahaha

 

[5.0x2]

What's the price you guys have paid for labor only?

 

[stangpride5.0]

eddy over at leonards wil probabl charge u liek 300 for parts and labor. probably 200 for jsut the labor provided that ur posi unit is still good.

 

[showstopper2]

cost me 150 and I had the gears for Dez to do them. had the piece of mind they would be done right too.......

 

[chuckystang]

I just got my car back from dez today, and had 410s put in for 300 and I also had the KB aluminum differential bushings put in and they seem great! the guys at dez are awsome! my 99 dynoed at 281 hp which Im pretty happy about since I believe it did not have the fix on the intake. The car does vibrate at 70-80 even though I do have a ford racing aluminum driveshaft which I dont even know if it is the right size and model to be there. You can hear a very very faint hum from the rear end kinda like an offroading tire but not bad at all. Overall 410's kick ass and just soo much easier to drive around and alot more powerful now, even in 5th gear. In conclusion, get gears! and also make sure you go to DezRacing! I have been to just about everywhere else and they are they best place around because they are very well rounded and know alot about everything. MPEracing was ok but very expensive, and APEracing does good work too but are even more expensive and no one's as cool as mikedezracing.

 

[stevegregoire]

hey are you guys saying that you are getting and 8.8 rear build for 300$ including the gear set?? when i are doing a 4.1 job lets say.. i ahve about that much in parts.. between the gear set. bearing sets, shims seals fluids and misc stuff..
as for you guys talkin about the irs cars like the cobra, and there vibration.. most of you have it right.. the majority of the prob it the poor drive shafts.. i usualy have my mustang guys get an alum shaft from mark williams.. they are the industy leader... thats what we use in our 8,and 7 sec Probes. can have any vibes goin that fast!!!!

 

[chuckystang]

well it was like 600 with parts and labor. and I dont think the vibs matter really it is just annoying

 

[5.0x2]

$150 and you brought the gears? That is a great price! I've gotta hook up with these guys over the winter! I'm currently installing a new rack and outer tie rod ends, so my car is out of comission for a short bit, then I'm going to be butt kicking busy at work for quite a qhile. Perhaps I can get in there before the snow starts falling. BTW, did you need to make an appointment, and how long did it take?

 

[showstopper2]

yeah call him to set up an appointment and he'll probably have them done the same day or for the following morning depending how busy he is.