• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

General Wire question

  • Thread starter Thread starter suki243
  • Start date Start date Jul 30, 2007
S

suki243

Member
Dec 19, 2006
662
0
19
Southern California
Jul 30, 2007
#1
  • Jul 30, 2007
  • #1
Is there any harm in running wires above the shock towers?

Where the red line is in the picture

View attachment 374371
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Jul 30, 2007
#2
  • Jul 30, 2007
  • #2
None that I know of. I have a bunch of wires run the same way.
Kevin
 

fasttback

New Member
Apr 16, 2005
471
0
0
Northern CA
Jul 30, 2007
#3
  • Jul 30, 2007
  • #3
Should be ok as long as it does not move toward the moving parts (shock, spring, etc). Why not route it with the existing set of wires on the side of the shock tower?
 
S

suki243

Member
Dec 19, 2006
662
0
19
Southern California
Jul 30, 2007
#4
  • Jul 30, 2007
  • #4
Because I'm taking those wires out, its a completely new harness and the wires are a tad bit shorter. I measured em wrong

I'm planning on using expandable black sleeving to cover up the wires. I believe it is also fire resistant.
 

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Jul 30, 2007
#5
  • Jul 30, 2007
  • #5
suki243 said:
Because I'm taking those wires out, its a completely new harness and the wires are a tad bit shorter. I measured em wrong

I'm planning on using expandable black sleeving to cover up the wires. I believe it is also fire resistant.
Click to expand...

I'm using 3/4" black corragated wire loom and have my entire harness running right there just like that. It isn't perty, but it keeps the wiring out of the way.
 
C

Clarko

New Member
Jul 20, 2004
15
0
0
Woodland Hills, CA
Jul 30, 2007
#6
  • Jul 30, 2007
  • #6
It's fine to run them there, just make sure they don't rub on anything.
 
S

suki243

Member
Dec 19, 2006
662
0
19
Southern California
Jul 31, 2007
#7
  • Jul 31, 2007
  • #7
Thanks, I'll post a pic of my work tomorrow, I did the entire car's wiring today and my arms are beat! I still have to wire head lights but it started up!!!

Does anything connect to the I terminal of the starter?What i did with wiring is my headlight stuff goes where the red line is above, the wires going to the starter and alternator go really close underneath next to teh cowl, then under the export braces to teh back of the shock tower and then over the shock tower to the starter. A similar set up is used for teh temp sending, oil sending, and tach and pos coil wires.
 
C

Clarko

New Member
Jul 20, 2004
15
0
0
Woodland Hills, CA
Jul 31, 2007
#8
  • Jul 31, 2007
  • #8
I terminal on the starter or the solenoid?
What kind of starter are you using?
 

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Jul 31, 2007
#9
  • Jul 31, 2007
  • #9
I think he means the starter motor relay/solinoid on the firewall.
 
S

suki243

Member
Dec 19, 2006
662
0
19
Southern California
Jul 31, 2007
#10
  • Jul 31, 2007
  • #10
ya the one on the firewall, I'm running a stock starter and relay and everything else
 
You must log in or register to reply here.

Similar threads

Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
370
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
J
Intake
  • James S
  • Jul 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
269
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2026
James S
J
S
Resolved 83 alternator wiring harness
  • sparten5000
  • Aug 2, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
152
Fox 5.0 Mustang Tech Aug 23, 2026
limp
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
309
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Fox 1984 GT Wiring Splice
  • handymancanfixit
  • Oct 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
590
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 3, 2025
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?