• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Getting gears, should I get a rebuild too?

  • Thread starter Thread starter DarkProphet
  • Start date Start date Apr 10, 2007

DarkProphet

Founding Member
Aug 19, 2002
391
0
0
Quakertown, PA
Apr 10, 2007
#1
  • Apr 10, 2007
  • #1
Hey guys, im finally getting some gears in my car. I think im going with 3.55's instead of 3.73's but have not decided yet.
The rear is stock as of now, and has 108k miles on it. Should I get it all rebuilt while im getting gears? I never have a problem with it not spinning posi, and there are no noises or any other problem that I know of.

The price for gears/installation is 425.
If i want new bearings too its 650.
If I want the trac lock rebuilt (new clutches) on top of it all, its about 850.

Do these prices soud good? Should I just get gears? Gears and bearings? or everything? thanks.
 
9

95Mustang302

Member
Mar 30, 2005
302
0
16
Apr 10, 2007
#2
  • Apr 10, 2007
  • #2
your getting ripped off

I bought gears on ebay for 30 bux, then I bought a rebuild kit for the install for another 65, and had a shop install them for another 100...

You should shop around and hit up ebay
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 10, 2007
#3
  • Apr 10, 2007
  • #3
95Mustang302 is 100% correct that is what i did i bought used ford gears(373's), bearing master kit, axle bearings,axle seals and traction lok rebuild kit off e-bay,ask the shop what they charge for labor if you supply all the parts. i paid a shop $200 to install total price was under $400....
 

jtb19nh

Member
Jul 9, 2005
156
0
17
Apr 10, 2007
#4
  • Apr 10, 2007
  • #4
i've also been looking into this. the best price i found around here for gear install and track-loc rebuild was $425. This is labor only with me supplying all the parts.
 

DarkProphet

Founding Member
Aug 19, 2002
391
0
0
Quakertown, PA
Apr 10, 2007
#5
  • Apr 10, 2007
  • #5
These prices include all parts and labor. I've called around and this seams to be the best prices around. I really only wanted to pay like 5-6 for everything, but I guess im out of luck?

Either way, should I get it rebuilt too? Or should I just swap out the gears and maybe the bearings?
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Apr 10, 2007
#6
  • Apr 10, 2007
  • #6
You can get everything brand new from buyfordracing.com

I got gears, install kit with all bearings and seals, and trac lok rebuild for like $330 .

the cheapest install I have found around here is ~$375 with the rear end out of the car. $450 with it still in. And some other place wanted like $700. $1600 w/o parts. I seriously can believe how bad they try to rip some people off.


Do a rebuild. You will regret it if you get one wheel spin a month after doing gears.
 
You must log in or register to reply here.

Similar threads

Rear diff rebuild opinions
  • MrPerfect2
  • Oct 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
202
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 31, 2025
AeroCoupe
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
250
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
550
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
Drivetrain 8.8 trac lok spider gears..
  • rednotch
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
329
Fox 5.0 Mustang Tech Oct 28, 2025
rednotch
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
803
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?