Ok never had any experience with the strokers and cam in a 1994. I am going to start it this afternoon and i was wondering what to expect and what to do to get it running good enough to go down the road set the timing and what not.
yeah i should have said something about the other stuff. 1969 351 heads port polished, f303 cam, 30#ers, Maf to match, trickflow track heat, 75mm throttle body. I did get it fired up and ran ok for 5 min. until stock pushrods wore in the guide plates and a rocker jumped off. (I dont know what i waas thinking using stock pushrods and guide plate with stud mount.) Got new hardened pushrods and guide plates putting them in tomorrow so maby i will get it started and see what happens. What is a good timing for that cam. 14*