Go Over My Motor Parts List Please

[jAEded]

After looking into this gasket kit I got it looks like I'm still going to be buying some gaskets. From what I can tell the intake gaskets (1250) are junk, the valve cover gaskets are cork, so there junk and the oil pan gaskets are junk. 100 bucks is allot to pay for head gaskets, timing cover, abd all the other little random gaskets. I'm thinking about returning it too and buying gaskets on my own

I've spent quite a bit on gaskets.

I like the cometic timing cover gasket. http://www.summitracing.com/parts/cgt-c5660-020/overview/
1 piece oil pan felpro - http://www.summitracing.com/parts/fel-os13260t/overview/make/ford
felpro valve cover - http://www.summitracing.com/parts/fel-vs13264t/overview/make/ford
The 9333 pt1 head gaskets are also what I run. $20 at local Napa.

 

[mikestang63]

wahlbro 255. bought mine from TRE performance on E bay fpr $94 shipped with the install kit. Got it in 2 days. Get a mini high torque 1 wire starter if you are going to upgrade

 

[fivespeedsteed]

any brand reccomendations on the starter?

and again, do i need an adj. pressure regulator?

 

[fivespeedsteed]

and when i lookup valve cover gaskets it gives me VS13264T but says must be used with MS 94555. whats that about

 

[jAEded]

Not sure why it would matter. I run those gaskets with a trick flow intake. The MS 94555 plenum gasket wouldn't even fit on mine. They do work on my setup without MS 94555.

 

[fivespeedsteed]

ok so i ordered

MS95953 Plenum Gasket
MS93334 Intake Manifold Gasket
OS34508R Oil Pan Gasket
VS13264T Valve Cover Gasket

does anyone know if i will benfit from an adj pressure regulator?