• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Going to carb from efi, best way to do fuel setup

  • Thread starter Thread starter 1993SSP
  • Start date Start date Dec 7, 2007
  • 1
  • 2
Next
1 of 2 Next Last

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
Dec 7, 2007
#1
  • Dec 7, 2007
  • #1
whats the hands down best way to make this conversion?? please include details and parts needed from tank to carb.
 

91 HATCH

Banned
May 17, 2007
262
0
0
illinois
Dec 7, 2007
#2
  • Dec 7, 2007
  • #2
they sell a in tank pick up tube for getting rid of the fuel pump in tank get one and a inline fuel pump and filter then run new -an line to engine bay and adapt it to your carb


sorry i read it wrong
 

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
Dec 7, 2007
#3
  • Dec 7, 2007
  • #3
im going to carb and ditching EFI
 

jcw88

Never played w/ it before so i'm still a virgin!
Mar 20, 2007
53
0
0
fernandina, fl
Dec 7, 2007
#4
  • Dec 7, 2007
  • #4
i have a 86-93 intank pump with a inline filter under the hood connecting straight to my carb.. i also have a holley fuel pump on my firewall as a secondary but is not hooked up yet..
 
K

klg

New Member
Dec 3, 2007
31
0
0
kpt. tn
Dec 8, 2007
#5
  • Dec 8, 2007
  • #5
u can take the fp. out of the tank but leave the bracket 4 it . put in a piece of hose the same lenghth as the fp. was back in tie it 2 the bracket -- . under the hood below the brake booster u can cut the plastic lines off wher they conn. 2 metal lines and use rubber hose . u can use a 3 way fuel filter under the hood if u want 2 use the return line -- .put your new fp. near the tank and cut away any plastic lines u have 2 and replace with hoses
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Dec 8, 2007
#6
  • Dec 8, 2007
  • #6
There are a lot of ghetto ways to fab up a fuel pickup, or you can buy the real thing, or even hit up a junkyard for a tank from a carbed car (what i would do). A lot of people just take the pump off the little bracket that it's on, and put some fuel line straight down into the tank with a sock filter on the end of it. This works but may not work forever. If you're gonna do it right and take the tank out of the car, it'd be just as easy to put the right tank back in from a carbed car.
 
B

bstrd86

New Member
Oct 17, 2003
44
0
0
DFW tx
Dec 8, 2007
#7
  • Dec 8, 2007
  • #7
Could you keep the stock pump and run a return style regulator, or would that be too hard on the pump?
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Dec 8, 2007
#8
  • Dec 8, 2007
  • #8
bstrd86 said:
Could you keep the stock pump and run a return style regulator, or would that be too hard on the pump?
Click to expand...


People have done it but i think it's a stupid idea. You're regulating 40psi or so down to 6-7 for the carb. If your regulator fails, your car is gonna burn down.
 

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
Dec 8, 2007
#9
  • Dec 8, 2007
  • #9
I'm not wanting to ghetto rig it by no means!! It would be impossible to find a carb car around here to get a tank from. I wish there was a replacement in tank pump that put out the low psi that the carb needs
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 8, 2007
#10
  • Dec 8, 2007
  • #10
Are you keeping the blower and going blowthrough?
 

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
Dec 8, 2007
#11
  • Dec 8, 2007
  • #11
I failed to mention, this is for my 86 model 4 cyl to V8 swap
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 8, 2007
#12
  • Dec 8, 2007
  • #12
Buy yourself a granatelli or central coast pickup for in the tank. get your fuel pump of choice something that will pump 6-10 psi or so at 100 gph. I like to use the alum. 3/8 spooled fuel line to run up to car but the braided stuff works very well also. lay out your new fuel line along bottom of car, I like to hide mine in my subframes. find a good place to mount your pump and filter safely and securely and start to lay out your lines. if you get a pump that requires regulator you can mount that on your strut tower under hood.
 

1993SSP

Founding Member
Sep 5, 2001
1,194
0
37
Ky
Dec 8, 2007
#13
  • Dec 8, 2007
  • #13
Good deal, thanks for the suggestions. I plan on picking up a complete car at the salvage sale, had tossed around the idea of just dropping the 5.0 EFI in it, still debating exactly what to to
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Dec 8, 2007
#14
  • Dec 8, 2007
  • #14
I personally like mechanical fuel pumps for carbed cars. There are some badass mechanical pumps out there these days and that's one less electrical item to wire up and deal with.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 8, 2007
#15
  • Dec 8, 2007
  • #15
mechanical pumps work well I just don't like the parasitic drag they produce, and the fact that if the bladder in them ever goes bad they can fill your crankcase with gas(i had that one happen on the 84) but to each his own they both work well.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Dec 8, 2007
#16
  • Dec 8, 2007
  • #16
True but c'mon that's way less drag than power steering or something like that. It can't take more than 5hp to operate.
 
B

bstrd86

New Member
Oct 17, 2003
44
0
0
DFW tx
Dec 8, 2007
#17
  • Dec 8, 2007
  • #17
85_SS_302_Coupe said:
People have done it but i think it's a stupid idea. You're regulating 40psi or so down to 6-7 for the carb. If your regulator fails, your car is gonna burn down.
Click to expand...

Just a thought, the reason I thought of it is because a friend of mine is running the same pump as I am (a1000) & he is carbed & I am EFI.
 
Y

Yellowpnoy

New Member
Feb 6, 2006
203
0
0
Dec 9, 2007
#18
  • Dec 9, 2007
  • #18
I am in the process of converting mine over to carbed. I used the granatelli tank insert, but i found it on craigslist brand new. I called everywhere, and they were on backorder for at least 4 weeks. Even cartech was out of stock of their own brand, guy said they are real popular. I used braided stainless line, if you use that, do yourself a favor and get the hose cutters for it, and some -an wrenches and the vice jaws, it will make your life a lot easier. You could also do a sumped tank but that is way more expensive. I used the Mallory comp 140 pump and regulator, summit sold them as a kit and it was reasonably priced. You can also use the A1000 which is what a lot of guys use. Good luck with it!
 
Y

Yellowpnoy

New Member
Feb 6, 2006
203
0
0
Dec 9, 2007
#19
  • Dec 9, 2007
  • #19
I am in the process of converting mine over to carbed. I used the granatelli tank insert, but i found it on craigslist brand new. I called everywhere, and they were on backorder for at least 4 weeks. Even cartech was out of stock of their own brand, guy said they are real popular. I used braided stainless line, if you use that, do yourself a favor and get the hose cutters for it, and some -an wrenches and the vice jaws, it will make your life a lot easier. You could also do a sumped tank but that is way more expensive. I used the Mallory comp 140 pump and regulator, summit sold them as a kit and it was reasonably priced. You can also use the A1000 which is what a lot of guys use. Good luck with it!
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Dec 9, 2007
#20
  • Dec 9, 2007
  • #20
I also run an A1000 on a carbed motor you just need to run a return line that is huge to keep the flow going and keep as little backup at reg as possible and it works. For example we run a 10an up to reg and a 12an return line, that keeps the pump happy.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
777
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
S
CFI to carb conversion question
  • StockerStang
  • Mar 23, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
536
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2025
AeroCoupe
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
636
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
324
Other Auto Tech Mar 3, 2026
Noobz347
P
Engine Swapping EFI distributor for carb distributor- shaft length is different
  • pindude80
  • Jul 20, 2024
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Jul 21, 2024
pindude80
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?