good coilovers?

[njoliver]

what are some good road race coilovers that bolt up in stock shock location? just getting my underbody finished and need some good coilovers I heard UPR were not that good. any suggestions I am trying to stay under $1,000 and also looking for adjustable rear control arms that except sway bar any help there too is appreciated

 

[skunk21]

My vote is going to be Maximum Motorsports..

Fronts:
Maximum Motorsports Mustang Front Coil-Over Kits

Rears:

MM Rear Coil-Over Kits : Maximum Motorsports, the Latemodel Mustang Performance Suspension Leader!

some of the besy quality in the business.

 

[njoliver]

yea I think I ight try them out

 

[Mustang5L5]

Also look into their strut tower brace and caster/camber plates.

Now that the strut towers will be taking the load of the suspension, you want to reinforce them with a good STB and good C/C plates.

 

[Shaolin Crane]

Also look into their strut tower brace and caster/camber plates.

Now that the strut towers will be taking the load of the suspension, you want to reinforce them with a good STB and good C/C plates.

actually Mike the strut tower brace only enforeces the car during EXTREMELY hard braking, as the shock towers tend to mive forward slightly causing a mild caster change, does little to help stiffen the car, and its been proven that the car can take the load of coil overs just fine, lots of info and testing over on corner carvers about that, but yes C/C plates are a must

 

[thethirdeye88]

i went with the koni's and h&r springs, 275 in front and 260-280 in the rear...

 

[njoliver]

I am just doing the rear right now think it will work fine with the stock front suspension

 

[Shaolin Crane]

I am just doing the rear right now think it will work fine with the stock front suspension

should work peachy

 

[Mustang5L5]

actually Mike the strut tower brace only enforeces the car during EXTREMELY hard braking, as the shock towers tend to mive forward slightly causing a mild caster change, does little to help stiffen the car, and its been proven that the car can take the load of coil overs just fine, lots of info and testing over on corner carvers about that, but yes C/C plates are a must

****, well in that case, i def need to get a MM STB

 

[skunk21]

****, well in that case, i def need to get a MM STB

you will love it it's a very nice quality brace. I like mine and the camber plates.

 

[Shaolin Crane]

you will love it it's a very nice quality brace. I like mine and the camber plates.

yeah i love mine too, along with the other few parts from MM i have