I have a bullet racing 347 that I topped off with some track heat heads a trick flow cam plus lifters push rods 1.6 rockers a track heat intake. 70 mm body with matching egr. BBk cold air intake. msd6al with blaster coil along with billet distributor. I believe it is a 76 mm mass air(C&L) and a set of motorsports 24 lbs injectors. I am running a edelbrock 255 lph pump. (93 gt computer) you think this is a good combo. My problems are all the lights are on inside as far as checking everythning. I Am now running manual oil and coolant temp guages. Could the fact that they are not working(the stock guages) Be the reason those lights are coming on? I am having cold start issues. When the motor is warm it starts every time. I had a vacuum leak but fixed that and it is the same. Timing it set at 14 with stout out. Fuel pressure is a little over 40. When it starts up cold I have to help it stay running and it stumbles. Once it is warm it screams when I hit the gas. But not when cold. This is about the last of my problem besides a mysterious coolant leak I still need to find.