• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Good loud knock at idle

  • Thread starter Thread starter badingle
  • Start date Start date Aug 2, 2006
B

badingle

Founding Member
Mar 18, 2002
127
0
0
Portage, Michigan
Aug 2, 2006
#1
  • Aug 2, 2006
  • #1
I finished my second cam swap a couple weeks ago and have been chasing my tail ever since. There is a pretty good knocking sound at idle and at idle only. Once you bring it up on the R's it goes away. I took it out, drove it around and it runs fine, actually really strong. That leads me to believe that its not in the motor.

I have checked just about every besides tearing it down and pulling the trans. I checked to see if anything was hitting somewhere, retorques the torque converter bolts, pulled the starting to see if the flexplate was loose and came up empty handed.


Are there any suggestions? Should i pull the Trans to see if the flexplate is cracked, loose? tear down the motor again?


I must add that it did run fine b4 i tore it down.
 
B

badingle

Founding Member
Mar 18, 2002
127
0
0
Portage, Michigan
Aug 2, 2006
#2
  • Aug 2, 2006
  • #2
bump
 

mattmcdan

Member
Apr 19, 2006
176
0
19
Okeechobee, Florida
Aug 2, 2006
#3
  • Aug 2, 2006
  • #3
take the belt off and start the engine, see if it knocks! (don't run it too long maybe a minute tops, remember the waterpump isn't turning)
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
2
58
Port Elgin, Ontario
Aug 2, 2006
#4
  • Aug 2, 2006
  • #4
what kind of knock....
 
B

badingle

Founding Member
Mar 18, 2002
127
0
0
Portage, Michigan
Aug 2, 2006
#5
  • Aug 2, 2006
  • #5
mattmcdan said:
take the belt off and start the engine, see if it knocks! (don't run it too long maybe a minute tops, remember the waterpump isn't turning)
Click to expand...


Tried that....still does it.


Its more or less of a really loud chatter. Its hard to explain. It sounds like its coming from the bottom end but I really dont think it can be. It idles and runs fine besides the chatter at idle. Oil pressure is fine too.
 
You must log in or register to reply here.

Similar threads

9
Electrical F150 ECU in a Foxbody? Idle surge help
  • 93royalblue
  • Sep 10, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
397
Fox 5.0 Mustang Tech Sep 17, 2025
Mustang5L5
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
372
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
335
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
869
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?