Got a '70 Ford 460

It depends on what you are after. A friend of mine put a mild 460 in his 86 and not much more and ran 10.80s. I know that is not the whole story but the motor was really mild. He spent some time on getting traction and as we all know that can be tough at times.
 
If you build it right it should live. If it is a dedicated drag car I would think maybe a 9 inch may be what you need. My car will never have enough torque to worry about it so I have not researched. Maybe get a hold of some of these places that specialize in rearends and they can help. Although you could contact the person mentioned above as well. Sounds like fun.
 
def put the 460 in the fox. especially since its gonna be a weekend drag car. a mild carbed 460 will make plenty of power, and be nice and simple. there shouldnt be any more part breakage issues over what you'd get from a wild boosted small block. and yes, the 8.8 if set up right should live just fine, but itll def need some work/parts put into it. something along the lines of a good locker type differential, t/a cover, some 31 spline hardened axles would be a good start id think.