Got a problem and need help, drive pulleys...

J

jae902

Member

Feb 11, 2003

175

0

16

Dec 23, 2003

#1

• Dec 23, 2003

• #1

This is whats going on. The car that i have is a 65 stang. The motor that i have is a 95 gt 5.0 motor. The motor came as a long block, with water pump. The alternator bracket with tensioner is from a 88 5.0. It fits fine, but when i line up the 95 pulley, the tension and alternator sticks out too far. Will this alternator bracket not work, does the 88-93 crank pulley stick out further. I need to get some underdrive pulleys, should i get the ones for 88-93 or the 94-95. What is the difference.

http://talespinmixing.virtualave.net/stang1.gif

 

a_turbo_stang

Member

Apr 13, 2003

346

0

16

Cincinnati Ohio

Dec 23, 2003

#2

• Dec 23, 2003

• #2

The 86-93 5.0 motors pulleys stick out farther. The 95-95 models do not stick out as far. You can get a timing chain cover and water pump for a 86-93 model and then everything will line up. Or can get all 95 accessories for it.

 

a_turbo_stang

Member

Apr 13, 2003

346

0

16

Cincinnati Ohio

Dec 23, 2003

#3

• Dec 23, 2003

• #3

Did you go fuel inj on your 65? I am working on switching a 66 over to a 5.0 fuel inj.

 

J

jae902

Member

Feb 11, 2003

175

0

16

Dec 24, 2003

#4

• Dec 24, 2003

• #4

No, kept it carb. Dang, so i have to switch all of that. Anyone got some 94-95 accessories. If i do change the accessories, is it just the alternator and ac bracket?

 

a_turbo_stang

Member

Apr 13, 2003

346

0

16

Cincinnati Ohio

Dec 24, 2003

#5

• Dec 24, 2003

• #5

Yeah that should be all you need. Just get the 95 brackets and you will be fine. I just got done switching one to the 93 style motor. So it would be easier on ya to get the 95 acc. Hope this helps ya.