Got My Pro Action/Pro Topline Cyclone heads:)

Got My Pro Action/Pro Topline Cyclone heads Pics Inside

Just got my Pro Action, Cyclone 215cc heads , they sent me the 58cc they didnt have any 64cc, no biggy.
Plus i got flow numbers
Not bad for $1025, they setup the springs to my cam too.
they look like darts/rouch head designe but flow awsome


intake Port Test Data @28" of water
.100 .200 .300 .400 .500 .600 .700
73 148 215 264 296 304 308

Exhaust Port Test Data @28" of water
.100 .200 .300 .400 .500 .600 .700
59 119 158 182 192 198 201


and this what Pro Action claim's,
intake Port Test Data @28" of water
.100 .200 .300 .400 .500 .600 .700
75 151 217 267 302 310 314

Exhaust Port Test Data @28" of water
.100 .200 .300 .400 .500 .600 .700
60 121 159 184 193 199 202


all in all pretty close to advertised
great heads ill have pics soon.
i got them at http://www.ce-racing.com tell them gary antonietti sent you

the quilty is that of dart/rouch, top notch, but i say they are comparable to edelbrocks, and best thing of all they flow very well for not haveing been cnc ported like afr's, but they do have 2.08's on the 215cc version, they need a bigg motor 347 plus, but they also make 200cc , and 180cc, 2.02 valve versions and they have alot of meat to port, but out of the box should be good to 650Hp

Heres some pics of the heads,

Deths91Gt said:

So those are the 215 cc--the intake flows very good--exhaust is a little low but still great numbers! when u planning on installling them? Does Pro action have a webiste?

Click to expand...

Yep there the 215cc, and i was a little dissipointed, about the exhast numbers, BUT they have ALOT of meat if you want to port

http://www.protopline.com

mabey this spring, im trying to get a 351w, but i just brought another mustang dirt cheap, so well see