• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

got my tire plugged

  • Thread starter Thread starter mustangkid05
  • Start date Start date Nov 11, 2006
  • 1
  • 2
Next
1 of 2 Next Last

mustangkid05

New Member
Mar 10, 2006
199
0
0
Nov 11, 2006
#1
  • Nov 11, 2006
  • #1
well i ran over a nail and i got my tire plugged but the dude left a little of that sticky stuff sticking out of the tire is it still good?.....and how long will the plug last me for?

thanks
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
Nov 11, 2006
#2
  • Nov 11, 2006
  • #2
damn 3 threads? It should be fine
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Nov 11, 2006
#3
  • Nov 11, 2006
  • #3
four six said:
damn 3 threads?
Click to expand...


lollerskates...


Some of the plug sticking out of the tire is common from what I have seen. It will last a long time as long as you dont triple post anymore...
 

mustangkid05

New Member
Mar 10, 2006
199
0
0
Nov 11, 2006
#4
  • Nov 11, 2006
  • #4
lol oh damn my fault.......my comp was freezing up and i just kept clicking post haha.......
 

cooper58d2002

New Member
Jan 3, 2006
98
0
0
Hope Mills NC
Nov 11, 2006
#5
  • Nov 11, 2006
  • #5
mustangkid05 said:
well i ran over a nail and i got my tire plugged but the dude left a little of that sticky stuff sticking out of the tire is it still good?.....and how long will the plug last me for?

thanks
Click to expand...

Way way back in the day (for me anyway) when I worked as a general mechanic at Firestone they made us stop plugging tires and instead installing patches due to a lawsuit filed somewhere were a women was killed by a blowout. The point I am getting at is the plug is fine if you just noticed the nail and no air leaked out. If the tire was flat or fairlly low on tire pressure (you can usually tell by some discoloration on the sidewall) I would have them patch it. Just so they can take a look at the inside of the tire if theres shavings in the tire you would need to replace it. hope this helps LOL
 

96BlueStangGT

Member
Jul 7, 2004
38
0
16
Southern Indiana
Nov 11, 2006
#6
  • Nov 11, 2006
  • #6
Don't count on it lasting too long. Some crazy person put a plug in the tire on my truck and it didn't last a month. The tire kept getting low after i aired it up. A patch is the only way to go. See if you can get both a plug and a patch.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,296
18,002
224
Massachusetts
Nov 11, 2006
#7
  • Nov 11, 2006
  • #7
When i plug tires, i take a pair of snips and snip away the excess plug that sticks out.

I also pour rubber contact cement all over the area and let it dry overnight before airing up the tire

All the plugs i have done myself have lasted the rest of the life of the tire.

I plugged one of my OEM goodyears at 9,000 miles. The tires now have 40K miles on them, worn down to nothing and the tire still holds air fine. I never have to air up at all. I can still see the plug too.

Guess i'm just good at plugging tires
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Nov 11, 2006
#8
  • Nov 11, 2006
  • #8
I have had my tires plugged for screws and nails many times. Never had a problem
 

Jsun3701

New Member
Dec 10, 2004
124
0
0
Virginia
Nov 11, 2006
#9
  • Nov 11, 2006
  • #9
I would say at least put it on the rear end if its not there already. If it goes; which it wont. At least its in the back. My old man always told me to do that.
 

Tally_4.6

Member
Feb 26, 2006
195
0
17
Orlando
Nov 11, 2006
#10
  • Nov 11, 2006
  • #10
Kilgore Trout said:
I have had my tires plugged for screws and nails many times. Never had a problem
Click to expand...
Same here, i have 2 plugs in my left rear and 1 plug on my right front.
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Nov 11, 2006
#11
  • Nov 11, 2006
  • #11
a plug is fine if donme properly. we use a combo patch plug at work and those things are bad ass!
 

96BlueStangGT

Member
Jul 7, 2004
38
0
16
Southern Indiana
Nov 11, 2006
#12
  • Nov 11, 2006
  • #12
SaleenGT2001 said:
a plug is fine if donme properly. we use a combo patch plug at work and those things are bad ass!
Click to expand...

That's what i was saying, the combos are the best if the place you go to does it.
 

jstreet0204

Active Member
Jun 26, 2003
939
0
36
Winston Salem, NC
Nov 11, 2006
#13
  • Nov 11, 2006
  • #13
Just don't do any burnouts with the excess hanging out or it can rip it out.
 
4

46gtsblown

Founding Member
Jan 9, 2002
278
0
0
Nov 12, 2006
#14
  • Nov 12, 2006
  • #14
If you took it to wallmart, discount tire or any other tire chain the will have used a combo plug patch, it will last the life of your tire and dont worry about the little nub sticking out it will quickly wear down.

Dwayne
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
Nov 12, 2006
#15
  • Nov 12, 2006
  • #15
i just had a nail though my Nitto's I used one of BMW's patch plugs to fix it. Its great. I would never use a regular plug anymore. Cars come in from time to time at my dealership that need "repatching" from those stupid plugs.

And it is normal for those plugs to be bulging out of the tire. So you're fine. Next time i would recommend patching it with a "patch plug" like this:

View attachment 425084

These go in through the inside of the tire, and patch the hole, and then the shaft goes through the hole itself acting as a plug as well
 

Jinx

I like cats, cats like me. Cats and I fully agree.
20+ Year Stangneter
Oct 2, 2003
12,166
4,237
223
Cat Country
Nov 12, 2006
#16
  • Nov 12, 2006
  • #16
It should be fine as long as the nail went in through the tread (not the side wall). Just remember, any tire that has been punctured and fixed no longer has it's valid manufactured speed/temperature rating.

+1 on the patch though. Mine went flat last Friday and I didn't know because it was on the passenger rear. Never the less, the tire tech took the tire off the wheel and showed me about 2 handfuls of shredded sidewall chunks
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
Nov 12, 2006
#17
  • Nov 12, 2006
  • #17
Mustang5L5 said:
When i plug tires, i take a pair of snips and snip away the excess plug that sticks out.

I also pour rubber contact cement all over the area and let it dry overnight before airing up the tire

All the plugs i have done myself have lasted the rest of the life of the tire.

I plugged one of my OEM goodyears at 9,000 miles. The tires now have 40K miles on them, worn down to nothing and the tire still holds air fine. I never have to air up at all. I can still see the plug too.

Guess i'm just good at plugging tires
Click to expand...


Thats the way I was taught to do it
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,296
18,002
224
Massachusetts
Nov 12, 2006
#18
  • Nov 12, 2006
  • #18
Jinx102672 said:
Just remember, any tire that has been punctured and fixed no longer has it's valid manufactured speed/temperature rating.
Click to expand...


+1

Not a lot of guys know this.

If you go out and spend $200 on some fancy Z-rated or better tires and get a nail in them, that tire is now basically an unrated tire. No matter how you repair it, it has lost it's speed rating.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Nov 12, 2006
#19
  • Nov 12, 2006
  • #19
I don't plug too many tires at work, becaue those jobs usually go to the oil change guys, but I plugged one of the tires on my wifes sunfire 3 years ago and it's still fine and don't leak.
 
M

MBDiagMan

Member
Sep 22, 2006
171
2
19
Lamar County, Texas
Nov 14, 2006
#20
  • Nov 14, 2006
  • #20
I have been plugging tires with a product called "Safety Seal" for the last 30 years. They use no glue, but they are made of a material that bonds to the tire.

Out of probably a couple of hundred Safety Seals that I've used, I've run across two or three situations where the tire had to be dismounted and patched on the inside. These things work virtually every time.

I've had a few tires over the years that had so many of thes things in them that they looked like cactus, but they never gave any trouble. Great product.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
153
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
96 GT 4.6 w/ dirty spark plug well
  • Mustang Momma
  • Apr 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
148
1996 - 2004 SN95 Mustang -General/Talk- Apr 9, 2026
LILCBRA
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
166
SN95 4.6L Mustang Tech Aug 4, 2026
jake411
J
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
434
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
29
Views
788
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 3, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?