I FINALLY GOT MY CAR STARTED AGAIN AND SHE TOOK HER FIRST STEPS!!!!!! I ACTUALLY GOT TO WHEEL HER INTO THE GARAGE WITH THE 5-SPEED, AND I HAVE ALL MY VACUUM HOSES HOOKED UP PROPERLY THIS TIME TOO!!!!!!!!!!! EVERYTHING IS GOING GREAT AND NOW I NEED TO DO SOME TUNING BEFORE I TAKE HER FOR THE BREAK IN WHICH I HOPE WILL BE FRIDAY NIGHT!!!!!!!!!!! I MET MY FIRST TIME FRAME I HAVE EVER SET, I WANTED IT DONE BY MY BIRTHDAY AND I GOT IT DONE 10 MINUTES BEFORE IT WAS OVER!!!! I FEEL GREAT!!!!! AND THE BEST PART I NOW HAVE 60PSI OIL PRESSURE AT IDLE!!!!!!
But anyway I got it done with the roller cam and all, now we need to get her running right so we can feel the power gains from all this work of over 1 1/2 years. I couldn't get the car to idle so I had to rest my foot on the gas, it was not getting enough gas. I didn't want to mess with the idle speed screws because I had them set so that .020" of the transfer slot is showing. I need to figure out how to work the idle-eze. First thing I am doing is making a call to Barry Grant tomorrow to see what they say. I don't want to flood the thing, which is why I only ran it for like 30 seconds. Would have spent more time on it and taken it for a drive but I lost the damned vacuum hose that goes into the distributor so it was a no go till I get that. Oh well things are going so well, nothing can get me down!!!!
But anyway I got it done with the roller cam and all, now we need to get her running right so we can feel the power gains from all this work of over 1 1/2 years. I couldn't get the car to idle so I had to rest my foot on the gas, it was not getting enough gas. I didn't want to mess with the idle speed screws because I had them set so that .020" of the transfer slot is showing. I need to figure out how to work the idle-eze. First thing I am doing is making a call to Barry Grant tomorrow to see what they say. I don't want to flood the thing, which is why I only ran it for like 30 seconds. Would have spent more time on it and taken it for a drive but I lost the damned vacuum hose that goes into the distributor so it was a no go till I get that. Oh well things are going so well, nothing can get me down!!!!