granatelli control arms any good?

[romgolferman]

I was wondering if they were any good and if they would make much difference in the hooking up problem in my 2000 stang.

 

[tomustang]

No

 

[squares98]

+1

 

[RandyStinchcomb]

here we go again

 

[01BlkGT]

 

[tomustang]

here we go again

Randy if your moderated site wants to support his ****ty products then don't bring it to here.

 

[RandyStinchcomb]

Randy if your moderated site wants to support his ****ty products then don't bring it to here.

I have no intention too, thats why I didn't go any further wth my comments

 

[tomustang]

I have no intention too, thats why I didn't go any further wth my comments

Sure

 

[rebelleader]

I own a set of Upper and Lower Control arms from GMS. I have not installed them yet. Upon visual inspection they seem just fine. The welds look ok and the arms are straight and True. They should be installed in the next week or 2. I will see if my view of them changes.

 

[SilverBullet00]

This thread is a small ball of snow gently rolling down a mountain side; soon it will become an avalanche!

I predict the general consensus will be "no"

 

[twogts4us]

No personal experience, but like many here, I've seen the pictures...crapola

 

[san~man]

I own a set of Upper and Lower Control arms from GMS. I have not installed them yet. Upon visual inspection they seem just fine. The welds look ok and the arms are straight and True. They should be installed in the next week or 2. I will see if my view of them changes.

No offense, but I've seen many pictures of them bent, broken and so forth. They are crap.

 

[Shiroelex]

I'll give a big NO vote on these too. I just changed some out on a v6 for some stockers, and they were fractured in two spots on one arm, and the other was warped where the metal bushing was, so it bounced around. You definitely get what you pay for. I recommend some Maximum Motorsports arms, especially the ones with the spherical bushings.

http://www.americanmuscle.com/maximum-motorsports-rear-lower-control-arms-99-04.html

Remember, it costs money to go fast. When you skimp out on quality, you could be skimping out on safety.

 

[romgolferman]

point well taken. thank u guys.

 

[tomustang]

 

[tomustang]

So damnit randy, why is he a supporting member on md if no one like his stuff?

 

[RandyStinchcomb]

So damnit randy, why is he a supporting member on md if no one like his stuff?

Im not sure why and I called for having his "vendor" status removed

Im guessing you read the most recent thread in the "suspension forum?"

 

[tomustang]

Im not sure why and I called for having his "vendor" status removed

Im guessing you read the most recent thread in the "suspension forum?"

I try to peak in from time to time in every suspension section, also posted there too Last time I was there he wasn't a Vender, but that was a while ago

 

[RandyStinchcomb]

I try to peak in from time to time in every suspension section, also posted there too Last time I was there he wasn't a Vender, but that was a while ago

you saw that too, huh

 

[tomustang]

you saw that too, huh

I'm sure you seen this before

http://forums.corner-carvers.com/showthread.php?t=25368



Yeah I foolishly bought some of his stuff years ago too