gt-40 question

W

whiteyford0212

New Member

Sep 21, 2004

24

0

0

May 23, 2005

#1

• May 23, 2005

• #1

i have a 93 gt and its time to replace the heads..i have all the other supporting mods:
3.73's
intake man., TB, mass air
full exhaust, pulllies, etc.

i found a set of gt-40 irons w/ 1.6 rockers..if i picked them up and bolted them on would it be alright? i wasnt sure if those rockers will work w/ a stock cam

 

VG30DE

Founding Member

Sep 16, 2002

364

0

0

Dudley, MA

May 23, 2005

#2

• May 23, 2005

• #2

yup, they go right in, same rockers, same pushrods, same cam all work fine.
I'm using a 97 explorer cam with 1.72's at the moment. Power falls off real bad at 5500 ish but it really doesnt matter with my setup. Just dont go over .490 lift with the stock pistons and you're all set.

 

W

whiteyford0212

New Member

Sep 21, 2004

24

0

0

May 23, 2005

#3

• May 23, 2005

• #3

so im good then w/ the 1.6 rockers?
what kinda gains can u get w/ those gt-40's

also how well does the e-cam work w/ a gt-40 combo

 

W

whiteyford0212

New Member

Sep 21, 2004

24

0

0

May 23, 2005

#4

• May 23, 2005

• #4

anyone?