Will someone please refresh my memory as to how to tell if a set of heads are GT40 or GT40P? I have found a set (iron) locally that have been ported, and wanted to make sure before I go look at them. Any other tips on things to look for/watch out for?
Also, what's is typically a good price range for a used pair? I know it's a matter of opinion and all relative to goals, but in general are they worth it? I want a little more "kick" for now, while I take care of some necessary nickel-and-dime repairs and body work. My engine is stock w/ new exhaust (FRPP shorties, BBK high-flow, and Flowmaster after-cat).I would like to mod more heavily, but that's a way down the road due to $$$. (Always the case, right?) I don't mind spending a little now, even if I replace them in a few years to upgrade.
FYI--Also waiting for install: 3.73 gears, 3g alternator, and Taurus electric fan. Hoping to buy and install MGW shifter in the next few months.
Thanks in advance!
Bryan
Also, what's is typically a good price range for a used pair? I know it's a matter of opinion and all relative to goals, but in general are they worth it? I want a little more "kick" for now, while I take care of some necessary nickel-and-dime repairs and body work. My engine is stock w/ new exhaust (FRPP shorties, BBK high-flow, and Flowmaster after-cat).I would like to mod more heavily, but that's a way down the road due to $$$. (Always the case, right?) I don't mind spending a little now, even if I replace them in a few years to upgrade.
FYI--Also waiting for install: 3.73 gears, 3g alternator, and Taurus electric fan. Hoping to buy and install MGW shifter in the next few months.
Thanks in advance!
Bryan
5.0 Nostalgia
10 Year Member
I believe the GT40 heads have GT stamped on them. When looking at a used set of heads, I would be sure to enquire about what they were previously used on. Ask if they have been magnafluxed to check for cracks and look at the overall condition of them. I saw a very clean set sell on Ebay last month for $265 (I think). Expect to pay $250-$400. Maybe less for something that needs to be gone through. Maybe more for a set complete with valvetrain, new seals, and rockers ready to bolt on.
Michael Yount
Mustang Master
Look on the ends of the heads -- if there are 3 parallel bars cast into them - they are GT's. The P's have 4 parallel bars cast on the ends. As stated above I think you'll also see "GT" or "GTP" cast into the head near the outside row of header bolts.