• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

GT40 or GT40P users.....

  • Thread starter Thread starter JBeezy53
  • Start date Start date Feb 14, 2006

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 14, 2006
#1
  • Feb 14, 2006
  • #1
Well school was expensive this year so I won't be getting my AFRs. I decided to go with either of the GT40 heads. I am leaning towards the "P" heads but the only problem I have is with the thermactor holes in the back of the heads, I'm in California and you need this to pass the visual. But anyways who has used these and what did you guys think? I have read many articles on the internet so please no links to more articles, I'm just trying to get to some feedback from people who have used these heads. I will use a Performer intake, TFS Stage 1 and 1.7rr with these.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Feb 14, 2006
#2
  • Feb 14, 2006
  • #2
I have a set of stock p heads, TFS Track heat intake, stage 1 cam and a set of 1.6 RRs. For the money that I have invested in the whole set up I am pretty happy with them. I plan on having them ported at somepoint in the future. IMHO they are a good budget head.

If you can pass the sniffer test you should be able to bolt the crossover tube on between the two heads. It won't work cause there are no thermactor holes but I believe that it should bolt on. Since all of the internal thermactor passages are already in the head you could have a machine shop drill out the passage at the back of the head if you needed to.

Which ever way you go they are better than stock.
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Feb 14, 2006
#3
  • Feb 14, 2006
  • #3
Thanks for the reply RYC.

Anybody else? Which ones will respond better to porting?
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Feb 14, 2006
#4
  • Feb 14, 2006
  • #4
You might want to pm thumper460 about porting. He does a bunch of porting on the stock e7s and also does the gt40 and the ps
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Feb 15, 2006
#5
  • Feb 15, 2006
  • #5
bolting up the air equipment to the head without the holes should get you past visual, and since your emissions are done with a warm engine, the pump is pumping air to the catalytic converters and not the head anyway - should pass just fine.
 
You must log in or register to reply here.

Similar threads

P
Vacuum
  • ProTechAutoServices
  • Aug 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
346
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
339
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
R
New heads
  • Robman8028
  • Jul 30, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 31, 2025
gkomo
T
Resolved No run or idle
  • Thebluefox1
  • Oct 10, 2025
  • Fox 5.0 Mustang Tech
Replies
14
Views
655
Fox 5.0 Mustang Tech Nov 25, 2025
DadLife0724
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?