GT40 or GT40P users.....

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Well school was expensive this year so I won't be getting my AFRs. I decided to go with either of the GT40 heads. I am leaning towards the "P" heads but the only problem I have is with the thermactor holes in the back of the heads, I'm in California and you need this to pass the visual. But anyways who has used these and what did you guys think? I have read many articles on the internet so please no links to more articles, I'm just trying to get to some feedback from people who have used these heads. I will use a Performer intake, TFS Stage 1 and 1.7rr with these.
 
I have a set of stock p heads, TFS Track heat intake, stage 1 cam and a set of 1.6 RRs. For the money that I have invested in the whole set up I am pretty happy with them. I plan on having them ported at somepoint in the future. IMHO they are a good budget head.

If you can pass the sniffer test you should be able to bolt the crossover tube on between the two heads. It won't work cause there are no thermactor holes but I believe that it should bolt on. Since all of the internal thermactor passages are already in the head you could have a machine shop drill out the passage at the back of the head if you needed to.

Which ever way you go they are better than stock.
 
bolting up the air equipment to the head without the holes should get you past visual, and since your emissions are done with a warm engine, the pump is pumping air to the catalytic converters and not the head anyway - should pass just fine.