GT40P Heads & 65mm TB & F1ZF

[3uzfte]

Heads, Intakes, .030 pistons, Injectors, MAFs, Dizzys

Justin Smith
(612)201-0693
[email protected]
Minneapolis, MN 55419

GT40p heads: sold.

I also have (3) F1ZF and (1) F2VF MAFs... As well as a 55mm MAF housing and a 70mm MAF housing

 

[3uzfte]

99' Mercury Mountaineer GT40 upper and lower intake $125 + shipping, 65mm Throttle body & Elbow 120k $125 + Shipping,

H.O. upper and lower intakes & throttle body (that's not an H.O. cam) 150k $50 + shipping

Keith Black .030 Hypereutetic pistons with a small nick on cylinder #3 piston due to an over rev. <500 miles

88' E7TE heads, Thermactor hole is plug, haven't been touched yet, only pulled from vehicle with OE gaskets underneath. 150k

D8OE Heads from a 78' 302, has one bent valve due to an over rev, valve jobs, valves, lightly ported, <500 miles $50 + shipping

Stock 79' 302 3.470" Stroke crank, with some surface rust, but the crank was re-manned and polished about 3 years ago. <500 miles

19# (set of 8) $25 shipped. 24#ers sold.
F1ZF or F2VF MAF sensor $10 + shipping I also have a 70mm MAF housing if you'd like.

2 Distributors
C3AF-12127-AB 63' Dizzy fitted with Crane XR-i points to digital conversion <500 miles $50 + shipping

E2AE-12131-CA 82' Dizzy for DuraSpark2 setup $20 + shipping

DuraSpark2 computer $10 + Shipping

 

[3uzfte]

ttt

 

[PunkKidJay50]

Do you have a full set of 24# injectors for a 93 5.0? If so, I'll take em! PM me if you take PayPal and I can pay immediately!

 

[3uzfte]

All 24#er are sold, I do go out once a week and pick up a set, I will let you know if I find more.