• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

GT40Y combo question

  • Thread starter Thread starter 50canuck
  • Start date Start date Nov 15, 2007
5

50canuck

New Member
May 23, 2004
35
0
0
Oakville, Ontario ,Canada
Nov 15, 2007
#1
  • Nov 15, 2007
  • #1
My combo of > GT40Y heads, Cobra I/T, lower cleaned up, 65mm tb, svo1.6rr, 1 5/8 shorties,2 1/2 bbk catted h & flows,pullies, efan, with this set up made 270rwhp/305rwtrq, can I squeeze another 10rwhp out of this set up by going to 1.7rr, the heads are low mile heads. any other suggestions would be appreciated.
 

jtfairlane

New Member
Mar 5, 2006
468
3
0
Nov 15, 2007
#2
  • Nov 15, 2007
  • #2
You didn't mention having a larger than stock throttle body or a larger than stock MAF sensor. If you are looking to pick up 10hp and you don't already have these things, I would look there.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 15, 2007
#3
  • Nov 15, 2007
  • #3
First off what camshaft, I am assuming stock? You will sacrafice a little low end grunt but there is another 10 rwhp in the 1.7 rockers and an intake spacer of 1 inch. You will think you actually lost power cause it will make it a bit soft down low, but you will notice the difference up top. You will problably pick up another 500 usable revs on the high end. I would also ditch the catted H if possible for an offroad, and look into a timing bump to 14 degrees.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Nov 15, 2007
#4
  • Nov 15, 2007
  • #4
Get a custom cam, have the heads valve jobbed, bowls cleaned up and milled and you will be able to squeeze 300rwhp out of that setup (with a good maf too if you don't already have one).
Keep the 1.6's, because most cams are ground to use them.

I know this is not the anwser you were looking for, so to answer the original question, 1.7's aren't worth the trouble, there is definetely NOT 10rwhp in them.
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
859
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
850
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
188
The Welcome Wagon Jul 3, 2026
5150K
5
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
639
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?