• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

GTE-650 project

  • Thread starter Thread starter SN65
  • Start date Start date Mar 23, 2006
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 23, 2006
#1
  • Mar 23, 2006
  • #1
With the SN65 project winding down, we are considering ideas for our next creation.

With that said, here is a link to what we are considering.

http://sn65.com/GTE-650 story.htm

While the overall concept is going to be up for debate, we do have a few items nailed down.

First: This is going to be a group build. I am looking for 10 courageous individuals (all with 65 or 66 fastbacks or coupes) who are willing to follow along step by step and build an exact duplicate of the project in their very own garage.

Second: The project is to be completed for a group meeting at the 2007 Columbus Ohio Good Guys Show. That gives us a year to complete the project.

Third: Budget. We are going to keep the budget to a minimum, but I expect that materials will run right around 40K when complete (you may even have some of the required materials at hand if you have a project car in the works right now). Also, while we are going to make every attempt to keep all tasks achievable by the average hobbyist, you may have to pay for services that are beyond your level of expertise.

Forth: ALL CARS WILL LOOK IDENTICAL TO EACH OTHER. There may be some leeway in regards to drivetrain selection, but all exterior and interior modifications are to be identical on all 11 cars. If you are hard headed (my way or the highway), if you are set in your ways, if you cannot play well with others, then this may not be the project for you.

I think it will be quite a site when all 11 cars roll into the 07 GGCS. If that doesn't turn some heads, I don't know what will.

If you are interested, just drop me a line.

Bob

PS: We already have a couple of people interested. If you think this is for you, please get in touch with me ASAP.
 
G

gzminiz

New Member
Oct 15, 2004
200
0
0
Phoenix, AZ
Mar 23, 2006
#2
  • Mar 23, 2006
  • #2
I read the info about the project. Are you planning on sticking closely to their design? I wish I had the time, money and know how to join you as this sounds like another great build.

Best of Luck to all those that join in.
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 23, 2006
#3
  • Mar 23, 2006
  • #3
Hi GZ,

Their (Ferrari's) design is actually my design. If you didn't catch it, this is a fantasy build, meaning that the whole project is going to be a "what might have been if..."

Bob
 

xj220

Founding Member
Sep 15, 2000
696
0
17
Mar 23, 2006
#4
  • Mar 23, 2006
  • #4
Ooh, I am eager to see this. I assume the cars will be painted Ferrari red?
 
G

gzminiz

New Member
Oct 15, 2004
200
0
0
Phoenix, AZ
Mar 23, 2006
#5
  • Mar 23, 2006
  • #5
I didn't catch that, darn work got in the way of actually getting the innuendo's.

You should build in a under carriage like ferrari's use, hehe.
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 23, 2006
#6
  • Mar 23, 2006
  • #6
xj220 said:
Ooh, I am eager to see this. I assume the cars will be painted Ferrari red?
Click to expand...
Hi 220,

Actually, decisions like this will be made once we get the group together.

A lot of the styling decisions are going to be reviewed by the group.

Bob
 

gonzothegreat

Member
May 4, 2004
421
1
16
London (uk)
Mar 23, 2006
#7
  • Mar 23, 2006
  • #7
I wonder how much Ferrari is going to sue you for using the name ENZO

anyway, good luck into that project, I am sure it will turn up fine like the SN65.
Any sketches that you can show us?
 

1320stang

Founding Member
Nov 13, 1998
4,329
23
89
Edmond, Oklahoma
Mar 23, 2006
#8
  • Mar 23, 2006
  • #8
Hmmmmm, '65 A-code coupe sitting in my driveway.......... (it'll be back in the garage soon).............. rotisserie found awaiting purchase.......... Miller 135 welder, Dewalt chop saw, Dewalt 4" angle grinder, Plasma coming soon, 300hp 302 w/ '69 351w heads ready to go in corner, Liberty modified Toploader, Lakewood, Vert-i-gate, '57 9" rear end.........

Is the $40k if you have no fabrication skills? I got skills......
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 23, 2006
#9
  • Mar 23, 2006
  • #9
gonzothegreat said:
I wonder how much Ferrari is going to sue you for using the name ENZO

anyway, good luck into that project, I am sure it will turn up fine like the SN65.
Any sketches that you can show us?
Click to expand...
I might have to change that. Although, they would not get much if they do sue me, it is pretty hard to squeeze blood from a rock.
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 23, 2006
#10
  • Mar 23, 2006
  • #10
1320stang said:
Hmmmmm, '65 A-code coupe sitting in my driveway.......... (it'll be back in the garage soon).............. rotisserie found awaiting purchase.......... Miller 135 welder, Dewalt chop saw, Dewalt 4" angle grinder, Plasma coming soon, 300hp 302 w/ '69 351w heads ready to go in corner, Liberty modified Toploader, Lakewood, Vert-i-gate, '57 9" rear end.........

Is the $40k if you have no fabrication skills? I got skills......
Click to expand...
Hi 1320,

I am basing that price on someone who only has the basic car. The 40K would cover new drivetrain, body panels, etc...

If you have these items ready to go, then the price will be quite a bit less.

Bob
 

gonzothegreat

Member
May 4, 2004
421
1
16
London (uk)
Mar 23, 2006
#11
  • Mar 23, 2006
  • #11
SN65 said:
I might have to change that. Although, they would not get much if they do sue me, it is pretty hard to squeeze blood from a rock.
Click to expand...

Bob, just keep the name as GTE-650
Have you been thinking of bringing some international candidates for that project?
 

xj220

Founding Member
Sep 15, 2000
696
0
17
Mar 23, 2006
#12
  • Mar 23, 2006
  • #12
There's a car you should check out. I tried to look for it but I can't find it. It's a classic roadster that's powered by a a Ferrari 550 engine. I thought it was a 32 Ford but I'm not sure. The guy also modified the nose and what not to make it look more Ferrari than Ford (or whatever make). Really cool car, but I can't find it.
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 23, 2006
#13
  • Mar 23, 2006
  • #13
Hi GTG,

Yes we accept and encourage international partisipation. That is everyone except the Cubans. It is not that we personally have anything against Cuba, but U.S. trade restrictions make it difficult to send and recieving materials, etc...

Bob
 
D

danny clemens

Member
May 4, 2005
728
0
16
Mar 23, 2006
#14
  • Mar 23, 2006
  • #14
Is the GTE a Ford name that didn't get used until the GT-E Cougar or is that a name that you gave it?
 

xj220

Founding Member
Sep 15, 2000
696
0
17
Mar 23, 2006
#15
  • Mar 23, 2006
  • #15
I know you'd like them identical and things are in the works, but if you're doing what I think you're doing (making a Mustang look like Ferrari built it), then it'd be much cooler to have a couple cars Ferrari red, yellow, black, silver and one blue. THAT would be hot.
 

gonzothegreat

Member
May 4, 2004
421
1
16
London (uk)
Mar 24, 2006
#16
  • Mar 24, 2006
  • #16
hey Bob,

http://www.mocgb.net/forums/showthread.php?t=7152
(i am Kermit )
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 24, 2006
#17
  • Mar 24, 2006
  • #17
danny clemens said:
Is the GTE a Ford name that didn't get used until the GT-E Cougar or is that a name that you gave it?
Click to expand...
I got the GTE from the Ferrari "1963 Ferrari 250 GTE 2+2 Series III"

Again, all of this is going to be up for review when we assemble a group of 10.
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 24, 2006
#18
  • Mar 24, 2006
  • #18
xj220 said:
I know you'd like them identical and things are in the works, but if you're doing what I think you're doing (making a Mustang look like Ferrari built it), then it'd be much cooler to have a couple cars Ferrari red, yellow, black, silver and one blue. THAT would be hot.
Click to expand...
Hi 220,

I was thinking of either having them all painted exactly the same color. Or... Having all 11 completely different colors. They will all have the same racing stripes, logos, decals, etc, but they will be consecutivly numbered 1 through 11. I was thinking about takeing the 11 with the other numbers going to the partisapants. But, we could all throw our names into a hat and draw for our numbers.

There are a number of directions that the project can take once we get everyone together. Also, the first people in will have more input into the direction the project takes.

Bob
 

SN65

Member
Oct 27, 2004
540
1
18
Chicago, IL
Mar 24, 2006
#19
  • Mar 24, 2006
  • #19
gonzothegreat said:
hey Bob,

http://www.mocgb.net/forums/showthread.php?t=7152
(i am Kermit )
Click to expand...
Thanks a lot Kermit. I really appriciate you spreading the word.

Bob
 

gonzothegreat

Member
May 4, 2004
421
1
16
London (uk)
Mar 24, 2006
#20
  • Mar 24, 2006
  • #20
If I had time/money/space/knowledge/tools I would had joined in.
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

R
Progress Thread A small update on our first-gen Mustang project
  • Restomotive
  • Apr 24, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
100
1965 - 1973 Classic Mustangs -General/Talk- Apr 24, 2026
Restomotive
R
5
Foxbody Intro
  • 5.0Sucio
  • May 26, 2026
  • The Welcome Wagon
Replies
1
Views
113
The Welcome Wagon May 26, 2026
Noobz347
D
97 V6 suspension upgrades
  • Dale1bre
  • Jan 18, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
337
SN95 V6 Mustang Tech Jan 19, 2026
Noobz347
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
653
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?