Guys with generic line lock please help...

[ricgt88]

I bought the TCI roll control unit and it has only one port 'in' and one port 'out'.

I want to cap one of the ports of the master cylinder and can't seem to find the right plug.

What did you guys use ?

Please help

 

[ricgt88]

TTT

or does everybody just uses the Hurst one ?

 

[trbkrb]

A friend did his with a Biondo unit and used a set screw as the plug on the MC. Here is a drawing of his setup with some info on the parts:

 

[TallyMan]

I used the hurst version, and I plugged the m/c using a 2 fittings from summit. They were in the section with all the hoses and fittings from aeroquip. One fitting was to go from metric thread on the m/c to -an fitting, then the second one was a cap for -an fitting. If you need the part #'s let me know. I am at work right now so I cant get you the part #'s till I get home.

Steve