H-Pipe, X-Pipe...emissions

I am getting a 92 LX that has an off road H-Pipe I'll need to replace with one with cats for emissions here is AZ. I'm not too familiar with exhaust systems, as I've never had to deal with it on previous Mustangs I've had. Why did they come stock with 4 cats anyway, just kind of a "talking to myself" question...don't have to answer. First would there be any reason an aftermarket have issues getting through emissions? Second are they fairly simple to install, just bolt up, plug in sensors? Any instructions or hints would be great.

Now which is better X or H pipe? Any recommended brands (it has Motorsport headers already).

Thanks.
 
I never cared enough to compare the differences between the X and H pipes, but it will have a slight affect on the power band and audible tone of the system. Others can answer that better than I.

The stock cats were great when they were developed, but better technology has come along since then. It used to take 4 cats to get the job done, but now you should be ok with 2.

If you still have the Air Pump then you may as well get a mid pipe that has a inlet for the fresh air. Cats are more effective and tend to last longer with fresh air, this probably isn't a major factor in aftermarket cats though.

jason
 
The horsepower numbers for an X and H pipe will be fairly similar. H pipes usually have a lilttle more torque, where as the X pipes have more horsepower. Again, its not a significant amount, but there is a difference.

Installing an h or x pipe is very simple. You only have to remove 8 bolts, two O2 sensors and reinstall the new one and youre done.