Fox Harness help

D

dshedd82

New Member

Feb 21, 2021

9

0

1

Amarillo, Texas

Mar 30, 2022

#1

• Mar 30, 2022

• #1

I’ve got a 91 Mustang that I’m dropping a motor and tranny out of an 02 f150 Harley Davidson edition pickup with supercharger. I’ve got wiring harness to motor along with the computer, fuel pump. Trying to figure out where I can find someone to possibly make a complete harness to go from that motor and tranny to wire directly to car. Already tried painless wiring solutions and they say that they aren’t setup to build custom harnesses. Any ideas or help in the right direction would be appreciated.

 

manicmechanic007

5 Year Member

Sep 26, 2017

2,524

709

143

Roy, Utah

Mar 30, 2022

#2

• Mar 30, 2022

• #2

You have no commercial takers because it is trial and error
The harness you think you need and have someone build for you, is likely not to work
You need a GEM module and the whole shooting match to do it right
That is why it is trial and error. You are going to try to make it work without gem right?
Steering column angle sensors the works
You need the complete harness from the Harley truck and a Spock type mind meld
It's like I tell people once in a while "you don't have enough money for me to do it for you"

 

Trogdor

5 Year Member

Aug 30, 2018

195

119

53

Anna, TX

Mar 30, 2022

#3

• Mar 30, 2022

• #3

Maybe a standalone would work better.

 

manicmechanic007

5 Year Member

Sep 26, 2017

2,524

709

143

Roy, Utah

Mar 30, 2022

#4

• Mar 30, 2022

• #4

Take a few classes?
Do it yourself?
You're half way there anyway
Your 91 has a 60 pin ecu (processor) and the 02 has 104
You need the 104 and will be emulating circuit sensor data
Hope for the best
You need to do things like put a steering angle sensor somewhere and plug the computer into it like it was
The sensor will never rotate but the car will not care and the light will be off for that circuit
You will do that with all 104 pins and I would find a GEM too

 

General karthief

wonder how much it would cost to ship you a pair

Mod Dude

Aug 25, 2016

27,826

10,507

203

polk county florida

Mar 30, 2022

#5

• Mar 30, 2022

• #5

You have a head start with having the harness but there are several stand alone systems for the modular ford engine, FAST, Hotwire Auto to name a couple.
That 5.4 is going to be a tight fit in a 91 body but it has been done.