• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Has anyone done a 03/04 Cobra motor and tranny swap?

  • Thread starter Thread starter pinski
  • Start date Start date Oct 13, 2004

pinski

Founding Member
Mar 17, 2002
710
0
16
43
North Carolina
www.cardomain.com
Oct 13, 2004
#1
  • Oct 13, 2004
  • #1
Just out of curiousity...it's one thing that I would absolutely LOVE to do down the road when funds/time/etc allows for it. Since the cars have been largely unchanged from '94-04, how difficult would the swap be?

The motor should fit, but would need new motor mounts and a hood and STB with more clearance. Also would the transmission tunnel need any kind of alterations, or would it slide right in? I would, of course, stick with a solid rear axle, but likely get a built one even though the stocker probably would be okay for the most part.

One other thing - since my car came stock as an automatic, how much of a PITA is the manual conversion? I wouldn't think it would be that hard, add a clutch, the shifter would fit thru the current hole, or if worse came to worse, a new console could be installed.

So, I guess what I'm asking, is it feasible for this to be done without huge modification? For now, ignore the cost of the motor, because right now that still makes it impossible, but it will go down in the future (fingers crossed).
 
B

bdcardinal

tree hugger
Jun 10, 2003
3,612
16
69
42
santa barbara, CA
Oct 13, 2004
#2
  • Oct 13, 2004
  • #2
we had a guy come into my work who had done that swap into his 1996 gt. he had BBK long tube headers and BBK catted H pipe. the fuel system had an Aeromotive FPR and was return style. he said that it dropped right in, they had to massage the powersteering lines for the brake booster a little, and then cut holes for the intercooler waterpump. he said that the heat exchanger fit fairly well into the Cervinis stalker front bumper. unfortunatly we had to fail him for smog becaue the headers, h pipe and fpr werent smog legal in CA, and we told him he had to convert to a returnless style fuel system since he had a 03 motor.
for the transmission he had a Viper Spec t56. he said it all fit really well.
there was a shop in houston that did all of the mods on the car, forget their name, but the install looked really good.
 

pinski

Founding Member
Mar 17, 2002
710
0
16
43
North Carolina
www.cardomain.com
Oct 13, 2004
#3
  • Oct 13, 2004
  • #3
bdcardinal said:
we had a guy come into my work who had done that swap into his 1996 gt. he had BBK long tube headers and BBK catted H pipe. the fuel system had an Aeromotive FPR and was return style. he said that it dropped right in, they had to massage the powersteering lines for the brake booster a little, and then cut holes for the intercooler waterpump. he said that the heat exchanger fit fairly well into the Cervinis stalker front bumper. unfortunatly we had to fail him for smog becaue the headers, h pipe and fpr werent smog legal in CA, and we told him he had to convert to a returnless style fuel system since he had a 03 motor.
for the transmission he had a Viper Spec t56. he said it all fit really well.
there was a shop in houston that did all of the mods on the car, forget their name, but the install looked really good.
Click to expand...


Thanks for the reply.

I figured it would fit no problem, but it's nice to have other people out there "test" out this theory

There will always be small issues such as the waterpump and pwr steering lines, but I'm glad to see he got it all figured out. That would be something to pop the hood on a '96 and see a '03 Cobra motor in there
 

BABstangV6

Smater than the average bear!
Apr 3, 2003
595
0
0
Rock Hill, SC
Oct 13, 2004
#4
  • Oct 13, 2004
  • #4
In an issue of either 5.0 mustangs or MMFF a guy had dropped an 03 motor into his 97.
 

snkchmr

Active Member
Apr 18, 1999
2,671
3
49
Gretna Va
rcmc.info
Oct 14, 2004
#5
  • Oct 14, 2004
  • #5
If I ever had problems with my motor in my Roush I would just find a wrecked 03/04 Cobra & rob the motor & trans.
From what I have seen it would cost around 10,000 to build a 500 HP 2v motor so I think it would make more sence to buy the Cobra motor & trans
 
You must log in or register to reply here.

Similar threads

C
96-984.6 COBRA MOTOR
  • COWBOY2.3
  • Feb 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
181
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
COWBOY2.3
C
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
619
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
667
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
146
Other Auto Tech May 31, 2026
LILCBRA
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
773
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?