• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Having some SERIOUS issues after intake swap...HELP!!

  • Thread starter Thread starter 1995GTStang
  • Start date Start date Apr 14, 2009
Prev
  • 1
  • 2
First Prev 2 of 2

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Apr 23, 2009
#21
  • Apr 23, 2009
  • #21
Put one them magnetic wands into the spark plug holes b4 pulling the heads and see if it catches anything .. worth a shot.
 

1995GTStang

New Member
Feb 9, 2009
74
0
0
Washington State
Apr 24, 2009
#22
  • Apr 24, 2009
  • #22
alright.....heres the latest

I put the intake back on. It is still making the same sound. I have how ever noticed it is coming from the back cylinders.

I remembered that when I pulled the fuel rails in the beginning I broke a couple of the injectors ( the plastic flange on the bottom part just below the o-ring) A neighbor friend of mine gave me some 19# injectors from an 88 mustang gt.
I am wondering if these injectors are firing properly?!?! would they make this sound if they were not firing at all?? The car seems to have a rough idle, but heck its always had that.

I checked the rear cylinders for any debris and I could not find anything. The spark plugs looked good as well.
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Apr 24, 2009
#23
  • Apr 24, 2009
  • #23
Yes. I was going to mention that seriously..good call.
 

1995GTStang

New Member
Feb 9, 2009
74
0
0
Washington State
Apr 24, 2009
#24
  • Apr 24, 2009
  • #24
well good news.....knock is gone....whew

after a huge sledge hammer....and running it with no oil I cured the problem lol j/k

It took a quart of trans fluid and running for a few minutes before the sound went away. I guess the lifters needed a little persuasion.

Anyways....thanks for the help, tomorrow I am going to change the oil put some good stuff in, hopefully no more probs after this.


Thanks guys
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

J
MEED HELP!! 86 mustang
  • Jacob0121
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
313
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
581
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
J
Fox Cam swap gone wrong??
  • Jimmer009
  • Apr 21, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
585
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2025
Jimmer009
J
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
554
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
781
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?