Well, Im oging to have to buy new HG's. Apparantly my heads are completely flat/level so they are going to the machine shop to be resurfaced/decked. Not major but my drivers side head seems to have a lil minor issue.
Anyways, I was considering felPro 1101 (i believe thats it).
However, I wastold to run Cometics as they are 125/pair. Thats REAL high to me This is a stock block, P-headed, full bolt on 302 on the Nx wet kit.
So what HG should I use. I really dont have tons to spend on this top end rebuild. Plus i need to get good intake/exhaust gaskets this itme aorund too with locking headerbolts.
All opinions are welcome but solid evidence and proof of what works would really help me out here. Im kinda tired of rebuilding this damnthing and I finally ofund my culprits. Thanks.
Anyways, I was considering felPro 1101 (i believe thats it).
However, I wastold to run Cometics as they are 125/pair. Thats REAL high to me This is a stock block, P-headed, full bolt on 302 on the Nx wet kit.
So what HG should I use. I really dont have tons to spend on this top end rebuild. Plus i need to get good intake/exhaust gaskets this itme aorund too with locking headerbolts.
All opinions are welcome but solid evidence and proof of what works would really help me out here. Im kinda tired of rebuilding this damnthing and I finally ofund my culprits. Thanks.