Head Gasket

[1BAD89GT]

Im looking for a head Gasket to fit Back on my engine the only numbers i found on the old Head Gasket were 54115 G ive called around and nobody seems to be able to pull this number up its a victor reinz gasket but i just need a headgasket for a 302 bored .030 and needs to be .050 thick.If you have a part# of a gasket that matches this size please post.

 

[TheUser]

Im looking for a head Gasket to fit Back on my engine the only numbers i found on the old Head Gasket were 54115 G ive called around and nobody seems to be able to pull this number up its a victor reinz gasket but i just need a headgasket for a 302 bored .030 and needs to be .050 thick.If you have a part# of a gasket that matches this size please post.

i'm not sure, but to get .050 thick, you may need copper, which some say don't seal well, but the guy at my local performance parts store said he knows all kinds of guys w/ copper running 10's etc and they don't have problems, so to each his own. Uhh...SCE makes some coppers, mine is a 306 as well...the holes are 4.060 in the gasket, so it's cool...mine is .043 thick, $75 from him and the part number is...036064, remember that the sizes are 4.060 bore and .043 thick, so if you want thicker, it might be a diff. part number. Hope this helps.