R rustyruststang5 Member May 9, 2011 151 2 17 Ne Jul 28, 2011 #1 Jul 28, 2011 #1 looking to put about 10 lb of boost through my 306. what is a good head gasket to use? does it matter if my block is bored 10 over when picking a gasket?
looking to put about 10 lb of boost through my 306. what is a good head gasket to use? does it matter if my block is bored 10 over when picking a gasket?
5 50lxtacy New Member Mar 15, 2011 16 0 1 Jul 28, 2011 #2 Jul 28, 2011 #2 Cometic mls for a 4.030 bore
09secondGT Member Mar 4, 2006 79 0 6 KY Jul 28, 2011 #3 Jul 28, 2011 #3 ebay mls gaskets, they are made by pro-comp....and priced right at $60 a set shipped...
Rick 91GT Mustang Master Nov 29, 1999 9,692 95 99 PA Jul 29, 2011 #4 Jul 29, 2011 #4 Unless your block has a nice smooth mirror finish on it along with the heads I'd go to a Fel-Pro 1011-1 gasket and head studs. The MLS gasket needs a perfectly smooth finish to properly seal, I prefer the Fel-Pro gaskets as I have had Cometics leak between the layers.
Unless your block has a nice smooth mirror finish on it along with the heads I'd go to a Fel-Pro 1011-1 gasket and head studs. The MLS gasket needs a perfectly smooth finish to properly seal, I prefer the Fel-Pro gaskets as I have had Cometics leak between the layers.
R rustyruststang5 Member May 9, 2011 151 2 17 Ne Jul 30, 2011 #6 Jul 30, 2011 #6 thanks i ended up with some fel pro 9333s