• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Headlight seals (black plastic) question

  • Thread starter Thread starter FoxBodyGT
  • Start date Start date Mar 10, 2007

FoxBodyGT

New Member
Dec 18, 2002
71
0
0
Austintown, Ohio 44515
Mar 10, 2007
#1
  • Mar 10, 2007
  • #1
Searched and never found a good answer. I'm about to buy a set of replacement headlights (kit) and wondered if I had to buy the black seals, too.

The ones on my current setup have been siliconed onto the headlights. I havent' pulled them, yet, but I only want to place one order.

What has everyone else done?

Thanks in advance.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Mar 10, 2007
#2
  • Mar 10, 2007
  • #2
ebay.com

and blueoval sells them, its like 30 bucks if i remember correctly
 

FoxBodyGT

New Member
Dec 18, 2002
71
0
0
Austintown, Ohio 44515
Mar 10, 2007
#3
  • Mar 10, 2007
  • #3
I'm well aware of where to look for them, the question I asked was whether it was necessary to buy them.
 

bloopbloob

Member
Sep 27, 2006
578
4
16
Alberta
Mar 10, 2007
#4
  • Mar 10, 2007
  • #4
some come with everything some don't. the ones i got from texashotrods didn't come with anything, but i know of some sets that do, and even come with the mounting plate too and screws... just depends i guess.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 10, 2007
#5
  • Mar 10, 2007
  • #5
use your old ones..
 

Fett

New Member
Nov 2, 2004
766
6
0
Mar 10, 2007
#6
  • Mar 10, 2007
  • #6
You said your old ones are siliconed in. Does that mean the little metal tabs that normally hold the seal to the headlight are broken? If so, then you should buy new ones.

If your old seals are in good shape and the metal tabs are there, then just reuse those. It really depends on how they look and if they are still in good working order. Personally I bought new ones because mine were kind of haggard, I didn't want to put in new lenses and use old dirty seals.
 

FoxBodyGT

New Member
Dec 18, 2002
71
0
0
Austintown, Ohio 44515
Mar 10, 2007
#7
  • Mar 10, 2007
  • #7
I will probably just spring for them as I don't know the history of the ones on my car--they were siliconed when I got the car.
 
You must log in or register to reply here.

Similar threads

1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
655
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
185
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
231
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
608
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
E
Interior Door Panels
  • EbenajSGT
  • Apr 16, 2025
  • 2005 - 2009 Specific Tech
Replies
1
Views
214
2005 - 2009 Specific Tech Apr 16, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?