• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Headlights A Bit Lame

  • Thread starter Thread starter JD1964
  • Start date Start date Oct 10, 2017
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#1
  • Oct 10, 2017
  • #1
The battery and alternator are in good working order. The headlights are not as bright as they should be. Could it be these bulbs are just crappy? What about these aftermarket lenses, could they have poor design that would contribute to the problem?


 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#2
  • Oct 10, 2017
  • #2
Looks like these are the ones on the car.

https://www.americanmuscle.com/fox-chrome-headlights-amber.html
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Oct 10, 2017
#3
  • Oct 10, 2017
  • #3
What is the bulb number?
Does your headlights get brighter with higher rpms?
You could do a volt drop test at the headlight grounds.
Also look at the reflective material is still shiney
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#4
  • Oct 10, 2017
  • #4
karthief said:
What is the bulb number?
Does your headlights get brighter with higher rpms?
You could do a volt drop test at the headlight grounds.
Also look at the reflective material is still shiney
Click to expand...

Thanks for the suggestions. I will follow up on them and report.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Oct 10, 2017
#5
  • Oct 10, 2017
  • #5
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 10, 2017
#6
  • Oct 10, 2017
  • #6
Reflective material still shiney. Brightness consistent at idle and every rpm above idle.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Oct 10, 2017
#7
  • Oct 10, 2017
  • #7
There are little ground wires screwed into the top of the radiator core support on both sides by the hood prop. ( green little bolts...black wires ). Those are the headlight grounds. You can take them loose and clean them up...might help.

Check the connectors, too.

You could also buy sylvania ultra bright bulbs and blind the hell outta folks.
 
Reactions: jrichker

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 11, 2017
#8
  • Oct 11, 2017
  • #8
I’ll check the grounds and connections. I was pondering brighter bulbs but I surely don’t wanna be one of those jerks that blinds other drivers. I hate that. Of course proper aiming would be essential if I get brighter bulbs.
 
Reactions: 90sickfox

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Oct 11, 2017
#9
  • Oct 11, 2017
  • #9
The problem I've found with the aftermarket headlights is they don't seem to refract (not sure if that's the correct term) the light correctly.
Basically the beam seems to narrow not enough spread and aiming them is a crap shoot.
Not sure if this is what your experiencing?
 
Reactions: revhead347

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Oct 11, 2017
#10
  • Oct 11, 2017
  • #10
Aftermarket headlights....well..suck. They don't project the beam correctly, not that the stockers were much better. Those headlights were never factory, so you are relying on the supposed ability of a company to properly design and validate the reflector, and then build them in china with very loose QC and meet strict roadway standards that OEM's spend millions on design to achieve. So you need to take their abilty to project with a grain of salt.

However, part of the issue coule be electrical as well. The intensity of the bulb depends on the voltage it receives and this all depends on the wiring feeding it and the grounds. A good solution is to rewire the headlights so that the original wiring triggers a relay that is feeding direct voltage from the battery and a good ground. This will ensure the brightest beam from the bulb.
 
Last edited: Oct 11, 2017
Reactions: Noobz347 and jrichker

nelzfoxes

5 Year Member
Aug 20, 2013
472
325
94
Oct 11, 2017
#11
  • Oct 11, 2017
  • #11
I have a 1985 foureye and I will take aftermarket over my dim headlights. A candle might be brighter than these headlights.
 
Reactions: Boostedpimp

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,649
214
Acworth, GA
Oct 11, 2017
#12
  • Oct 11, 2017
  • #12
It's the aftermarket headlights. Get good quality OEM ones, and it will be much better. It won't be like a current model car though. Headlights have come a long way over the years. You can brighten them up with a set of better bulbs; like those $60 Sylvanias they sell at the parts store. I've bought them for all my older cars because my eyes just aren't what they used to be.

Kurt
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Oct 12, 2017
#13
  • Oct 12, 2017
  • #13
Grounds are good. Batt resting voltage 12.8. System run voltage at idle 14.7. Bulbs are Sylvania Xtra Vision which are decent quality.

Closer look at these aftermarket lenses and it’s obvious they’re crappy. Made for appearance, not function. They have maybe 9 large flutes in the reflector and shine through the clear lenses. OEM lens has maybe 250 flutes in 6 or 7 different groups. It’s obvious where the engineering efforts were.

Aftermarket top pic. OEM bottom

 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Oct 12, 2017
#14
  • Oct 12, 2017
  • #14
Try LED headlights i have a set in my 04 Excursion stock head lights they work great! a much brighter head light i can see now VS the crappy stock 9004 bulb.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,129
10,748
213
polk county florida
Oct 12, 2017
#15
  • Oct 12, 2017
  • #15
Here is what I see from the pic.
The reflective material at the back is dark, it appears the reflective material is either dirty or discolored not being able to reflect the light outward, is my observation correct?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Oct 12, 2017
#16
  • Oct 12, 2017
  • #16
John Dirks Jr said:
Grounds are good. Batt resting voltage 12.8. System run voltage at idle 14.7.
Click to expand...

Unfortunately that really doesn't tell you the whole picture. You have voltage drop through a headlight switch with known melting/overheating issues, plus general voltage drop through the wiring, so it's possible to have 14v at the batt but 10-11v powering the actual headlight under load.

Using relays is a method that ensures full voltage without any drop reaches the bulbs .
 
Reactions: General karthief and killer5.0

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,560
21,727
234
Box behind Walmart
Oct 12, 2017
#17
  • Oct 12, 2017
  • #17
Mustang5L5 said:
Aftermarket headlights....well..suck.
Click to expand...
I woild have stopped after this.
 
Reactions: General karthief and revhead347

killer5.0

5 Year Member
Oct 8, 2009
725
83
59
Oct 12, 2017
#18
  • Oct 12, 2017
  • #18
X2 on running headlight relays...they allow full battery voltage to the headlights...my headlights are tinted so i dont drive at night lol...but when i redid my wiring I added relays so when i do opt for different headlights they are as bright as possible...
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,649
214
Acworth, GA
Oct 12, 2017
#19
  • Oct 12, 2017
  • #19
Noobz347 said:
I woild have stopped after this.
Click to expand...

Exactly. Stop chasing electrical problems when the answer is so obvious.

Kurt
 

killer5.0

5 Year Member
Oct 8, 2009
725
83
59
Oct 12, 2017
#20
  • Oct 12, 2017
  • #20
I think this answer is two fold...to get optimum brightness upgrade to a better housing and add relays so they get full voltage...or do an HID retrofit
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
265
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
M
Need help!
  • Masonevans726
  • Dec 17, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
319
1996 - 2004 SN95 Mustang -General/Talk- Dec 17, 2025
Masonevans726
M
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
334
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
2
Resolved Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
494
1996 - 2004 SN95 Mustang -General/Talk- Sep 4, 2026
2000ElectricGreen
2
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
484
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?