I have been searching the forum all day for any problem similar to mine but have came up with nothing. I don't know if i am not referring to the right name or something, but i have tried everything like air vent switch, etc.
Well here is the problem, when you turn on the heat in my 70' mustang, it only blows it from the windsheild setting, it acts like its stock on that setting. I opened up the front pannel and took it out a little, and see everythign is connected properly and the vaccum lines sseem to be in good shape also.. What could the problem be, is it somethign i am overlooking? or if you know what word i should use to search if its a common problem?
Thanks in advance...
Well here is the problem, when you turn on the heat in my 70' mustang, it only blows it from the windsheild setting, it acts like its stock on that setting. I opened up the front pannel and took it out a little, and see everythign is connected properly and the vaccum lines sseem to be in good shape also.. What could the problem be, is it somethign i am overlooking? or if you know what word i should use to search if its a common problem?
Thanks in advance...