• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Heater Core Question (I think?)

  • Thread starter Thread starter caine0
  • Start date Start date Aug 29, 2005
C

caine0

Member
Jul 13, 2003
121
0
17
Aug 29, 2005
#1
  • Aug 29, 2005
  • #1
For the past couple of weeks there has been a tiny bit of smoke coming out of my vents. Nobody driving in my car has noticed it except for me because it is just a very small constant flow. It mostly only happens when I open my window and the air starts sucking it out. Then to test to see if it's the heater core I switched the fan to full, and put the other knob to "vent". A big puff of smoke came out of all the vents and kept on smoking for a bit. I thought maybe it's just because I hadn't used the heat for a few months, since it's been so hot outside. The heat is still blowing very hot from the vents.

My question is, would it be the heater core that has the problem even though it's still blowing very hot air? I have gotten the oil that people talk of on my window, had to wipe it off a couple of times now. Is there anything else that could cause this problem? I don't have very much spare time to work on the car, so I don't want to have to rip apart the dash to do the heater core if that's not the problem. Also, about how long would it take me to swap in the new heater core if I've never done this before? Thanks.
 
K

ka0tyk

Founding Member
Oct 10, 2001
1,610
0
0
Los Angeles, CA
Aug 29, 2005
#2
  • Aug 29, 2005
  • #2
caine0 said:
For the past couple of weeks there has been a tiny bit of smoke coming out of my vents. Nobody driving in my car has noticed it except for me because it is just a very small constant flow. It mostly only happens when I open my window and the air starts sucking it out. Then to test to see if it's the heater core I switched the fan to full, and put the other knob to "vent". A big puff of smoke came out of all the vents and kept on smoking for a bit. I thought maybe it's just because I hadn't used the heat for a few months, since it's been so hot outside. The heat is still blowing very hot from the vents.

My question is, would it be the heater core that has the problem even though it's still blowing very hot air? I have gotten the oil that people talk of on my window, had to wipe it off a couple of times now. Is there anything else that could cause this problem? I don't have very much spare time to work on the car, so I don't want to have to rip apart the dash to do the heater core if that's not the problem. Also, about how long would it take me to swap in the new heater core if I've never done this before? Thanks.
Click to expand...

if you have oily residue on your windshield then yes your heater core is leaking. also you can check your carpet under the airbox for moisture. id recommend replacing it asap since a nasty spill in the cab of the car could be disasterous. hot water will always circulate thru it from the motor.

you have two options.

a) loop the water pump feed lines back into the water pump and delete the heater core. no more heater. (temp fix?)

b) remove the entire dash, center console, seats, steering column, etc etc which takes about an entire weekend to do and replace the core with a genuine ford replacement.
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 29, 2005
#3
  • Aug 29, 2005
  • #3
ka0tyk said:
if you have oily residue on your windshield then yes your heater core is leaking. also you can check your carpet under the airbox for moisture. id recommend replacing it asap since a nasty spill in the cab of the car could be disasterous. hot water will always circulate thru it from the motor.

you have two options.

a) loop the water pump feed lines back into the water pump and delete the heater core. no more heater. (temp fix?)

b) remove the entire dash, center console, seats, steering column, etc etc which takes about an entire weekend to do and replace the core with a genuine ford replacement.
Click to expand...


the seats too? wow, I don't think I ever had to do that one...I've replaced my core four times (really high flow water pump=too much for stock heater core) and never even had to pull the dash...I just pulled the blower, the glove box and weaseled the box down far enough to pull the core from the hole where the glove box was...

however, if you still have working A/C, I still have yet to find a way to change the core without discharging it...
 
K

Kerpal

New Member
Aug 9, 2004
400
0
0
Aug 29, 2005
#4
  • Aug 29, 2005
  • #4
Definately sounds like a bad heater core, mine had the exact same symptoms... a little steam from the vents, condensation/oily film on the windows, but still blew hot air.

I ended up just bypassing the heater core with a U shaped piece of hose and a couple splices. The haze on the windows was getting so bad it would seriously impair my vision on rainy days.

txstang84, I assume you have an '84? I've heard replacing the core on the older cars is easier than it is on the '87-93's...
 

afast93stang

Founding Member
Jan 6, 2002
1,407
4
39
North Texas
Aug 29, 2005
#5
  • Aug 29, 2005
  • #5
Ive done 2 heater cores without discharging the A/C. Mustang Monthly has a good online article on how to do this...

http://www.mustangmonthly.com/howto/33658/index.html
 
C

caine0

Member
Jul 13, 2003
121
0
17
Aug 30, 2005
#6
  • Aug 30, 2005
  • #6
Thanks guys. A whole weekend to do it? My haynes manual doesn't make it seem that hard. Fak... I love my car, but I hate how everything is 15 years old in it.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 30, 2005
#7
  • Aug 30, 2005
  • #7
Here's another site for heater core R&R... http://home.netcom.com/~skent/mustang/1990/heater_core/hcore.html
 

afast93stang

Founding Member
Jan 6, 2002
1,407
4
39
North Texas
Aug 30, 2005
#8
  • Aug 30, 2005
  • #8
It doesnt take a weekend, between 5 -8 hours. With 2 people it will go faster.
 
You must log in or register to reply here.

Similar threads

Engine Bleeding air in the heater core
  • keel
  • Apr 2, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
244
Fox 5.0 Mustang Tech Apr 23, 2026
limp
D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
654
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
319
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
723
Fox 5.0 Mustang Tech Apr 13, 2026
Foxbodyjake
F
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
598
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?