Heater Hose Help

[95Cobra302]

Just got done removing the oil cooler in my cobra and need some help. I put in a new heater hose from the water pump to the hard heater line on top of the intake and there is a small kink in it since it was just a straight universal heater line. Would this cause a problem and if so, where do i find the custom bend hose for our cars??

 

[94CobraPace]

I got a couple of hoses that I thought would work and purchased them, got the best fit and took the rest back. I still have a small kink, but just going to the heater core, no worries here.

 

[Stanger007]

Good info above -- walk the aisle at the parts store and you should find a pre-made hose to work, may have to trim the ends to fit.

Wes

 

[ronstang94]

I was able to find an exact replacement after about 10 different auto stores, but they also have that thing that looks like a spring that gos over the tube and allows it to bend without kinking. dont know what they are called but i saw some in the isle at autozone.