Hedmans with Edelbrock 1406

joeythesaint · Dec 26, 2004

302, Edelbrock 1406 625 cfm 4-bbl. Installed Hedmans today, and it runs like crap. Stalls, chokes, hard to start. The mufflers aren't hooked up; it's just emptying out the 3" collectors. It ran KILLER with the restrictive exhausts; anyone find they had to make changes in jetting or timing when they replaced the exhaust manifolds with headers?
Thanks and Merry Christmas,
- Joey

vetwhat · Dec 27, 2004

it sounds like a major vacuum leak to me. check the back of the carburetor for a 1/4" npt plug, usually used for the brake booster. if that doesn't pan out check that you're getting fuel and not vapor lock. edelbrocks are prone to vapor lock. thats the only thing i can think of that would involve any change in the exhaust. ( change in heat).

Stewart Ledford · Dec 28, 2004

choke & die

joeythesaint said:
302, Edelbrock 1406 625 cfm 4-bbl. Installed Hedmans today, and it runs like crap. Stalls, chokes, hard to start. The mufflers aren't hooked up; it's just emptying out the 3" collectors. It ran KILLER with the restrictive exhausts; anyone find they had to make changes in jetting or timing when they replaced the exhaust manifolds with headers?
Thanks and Merry Christmas,
- Joey

Joey you have had the plugs and wires off for the header install; check your firing order.

joeythesaint · Dec 28, 2004

Bingo! Turns out #2 & 3 were reversed. Runs GREAT!

Thanks,

- J.

Hedmans with Edelbrock 1406

joeythesaint

New Member

vetwhat

New Member

Stewart Ledford

joeythesaint

New Member

Similar threads

Hedmans with Edelbrock 1406

joeythesaint

New Member

vetwhat

New Member

Stewart Ledford

joeythesaint

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency