• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Hellion Turbo...what To Do Next?

  • Thread starter Thread starter Randy281
  • Start date Start date Oct 15, 2012
R

Randy281

New Member
Oct 10, 2012
3
0
1
Oct 15, 2012
#1
  • Oct 15, 2012
  • #1
I have a 2007 GT with a 76mm hellion turbo system. I've done some suspension work and a few other bolt on stuff. I'm keeping the boost low right now to keep from blowing the engine. However, now I'd like to start building the car to handle higher boost. So where should I start? I know I'll have to get forged internals, any suggestions on which ones, and what else do I need to beef up the engine to handle the boost?
 

ct07gt

Member
Feb 14, 2008
377
0
16
Oct 17, 2012
#2
  • Oct 17, 2012
  • #2
The fuel system (pump and injectors) if not already done. The stock clutch, if you still have it, would not last long. If you don't drag race with slicks, the transmission should be ok if you don't abuse it. Make sure you do research and get a good builder and tuner, don't shop on price alone. There are plenty of horror stories out there about people having very expensive experiences with engine builders and tuners that don't know what they are doing.
 
R

Randy281

New Member
Oct 10, 2012
3
0
1
Oct 17, 2012
#3
  • Oct 17, 2012
  • #3
i already have the GT500 dual fuel pump and 63lb injectors. i also have a spec aluminum flywheel and stage 3 clutch, and an sct tuner....i'm really just looking at engine build stuff...like what i need besides forged internals, in order to up the boost like i want.
 

ct07gt

Member
Feb 14, 2008
377
0
16
Oct 17, 2012
#4
  • Oct 17, 2012
  • #4
You should be good, just find a good builder that knows how to tune mustangs. A bad tune will blow up even the best built engine.
 

retfr8flyr

Member
Jun 24, 2006
154
13
19
Oct 17, 2012
#5
  • Oct 17, 2012
  • #5
As far as the engine goes, one of the best bang for the buck shortblocks is the Brenspeed B326 for $4895. You can sell your stock shortblock to recoup some of the cost. You also will need a new trans. If you build the engine and start making real power, that Spec clutch will twist the input shaft off that trans. Either get the new T56 Magnum or go with a 6060 swap.


Earl
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
888
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
598
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
616
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
316
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?