in any case im in the market for long tube headers seems like there isnt much of a choice today vs a few years ago
i just built a 302 30 over with probe pistons with full floating pins probe rods and probe 4340 crank
went with a hyd roller 543-555 lift 220-228 duration afr 165 heads with 58cc chambers
10 5-1 comp its carbed performer rpm a/g with 1/2 wilson spacer with 650 holley dp
should be a nice street motor backed with a t5 with 3.55 gears
i know the t5 isnt going to take much will be upgrading the trans
in any case looking for a set of long tube headers i used to have kooks on my 86 fox drag car 302 with clevland heads car ran 9.90s at 133.00 no power adders
anyways building this street car motor is all together but having an issue finding LT headers bought a set of kooks didnt fit to well sent em back
was thinking of some ss headers but only ones i find are 1400 + anyone ever hear of RCI ? or CPR ?
not sure if 1-5/8 or 1-3/4 pri dont want to lose bottom end i see bbk makes some but not so sure of the ball socket collector or if they fit the exhaust ports on the afr heads
any info would be much appreciated thanks