Hello Stangnet - Been Awhile...

midnightdriver · Dec 29, 2013

Hello Stangnet,

Its sure been awhile and hope everyone is doing well. I wanted to say hello again and to check in the this pass.

Is the same group still around? Have people moved on?

@Nightfire , @sneaky98gt , @Winters98GT , to name a few.

Sure have missed my car and life has gotten in the way the past 1 year and some (can't believe its been that long).

Noobz347 · Dec 29, 2013

midnightdriver said:
Hello Stangnet,

Its sure been awhile and hope everyone is doing well. I wanted to say hello again and to check in the this pass.

Is the same group still around? Have people moved on?

@Nightfire , @sneaky98gt , @Winters98GT , to name a few.

Sure have missed my car and life has gotten in the way the past 1 year and some (can't believe its been that long).

Yep.... All of those clowns are still here.

I've modified your post a list to call those dudes out of hiding. Welcome back. They should see the alerts as they come through and log on.

Deleted member 38176 · Dec 29, 2013

Winters98GT · Dec 29, 2013

Still alive and kicking

Welcome back!!

Winters98GT · Dec 29, 2013

Btw, join us over in the squeaky wheel section @midnightdriver

sneaky98gt · Dec 30, 2013

I'm still around. I just finished up my last semester in engineering at school, so I've been super busy the last few months with design projects and job searching, and thus haven't done much posting online lately. Heck, only made it to the track one time this fall. Bummer.

I won't spill the beans yet, but there's some relatively big news with my car coming soon. I'll be starting on it sometime in the next week or so, and I'll post up about it when I do.

Winters98GT said:
Btw, join us over in the squeaky wheel section @midnightdriver

I need to do the same. I used to a bit, but haven't been around in a while.

midnightdriver · Jan 3, 2014

Winters98GT said:
Btw, join us over in the squeaky wheel section @midnightdriver

I will definitely drop in the Squeaky Wheel.

midnightdriver · Jan 3, 2014

Nightfire said:

When did you get the blower? I will have to do some searching for your build thread it you have one.

midnightdriver · Jan 3, 2014

sneaky98gt said:
I'm still around. I just finished up my last semester in engineering at school, so I've been super busy the last few months with design projects and job searching, and thus haven't done much posting online lately. Heck, only made it to the track one time this fall. Bummer.

I won't spill the beans yet, but there's some relatively big news with my car coming soon. I'll be starting on it sometime in the next week or so, and I'll post up about it when I do.

I need to do the same. I used to a bit, but haven't been around in a while.

Congrats on the final semester ! The job search can be a long rode, but in the end, the right place makes the day soo much better. I look forward to the build thread and glad your doing well.

Deleted member 38176 · Jan 3, 2014

midnightdriver said:
When did you get the blower? I will have to do some searching for your build thread it you have one.

Car went under the knife last April.

Induction
Procharger D1SC
3.0" HOB pulley
Procharger Big Red race BOV (open)
Mishimoto 4-core intercooler
VMP HPX blow-through MAF
Diablosport MAFia
Autometer boost gauge
Autometer wideband gauge
Aeroforce interceptor gauge

Engine
Stage 3 ported/polished PI heads
5-angle valve job & gasket matched
Comp Cams beehive valve springs
MMR valve seals
MMR adjustable lifters
MMR Pro-Ti valves
MMR valve guides
MMR 4340 forged crank (8 bolt)
MMR aluminum flywheel (8 bolt)
Manley 4340 forged H-beam rods
Manley forged pistons (-18cc notched)
Moly rings
Clevite rod/main bearing
ARP 2000 fasteners
MMR water pump
MMR billet oil pump

Exhaust
MAC ceramic-coated longtube headers
MAC O/R Prochamber
MAC 3" Flowpath catback

Drivetrain
TCI StreetFighter 3200 stall torque converter
B&M Supercooler transmission cooler
Performance Automatic street/strip valve body
FRPP 4.10 gears

Fuel
FRPP Aviator 310lph fuel pump
Kenne Bell 40-amp Boost-a-Pump
Lethal Performance FPDM wiring upgrade
Lethal Performance fuel line upgrade w/ MMR rails
Siemens Deka 60lb injectors

Suspension
H&R SS springs
Maximum Motorsports LCA's
Maximum Motorsports FLSFC's
Maximum Motorsports CC plates
Maximum Motorsports sport series shocks/struts
Prothane total bushing kit

*breath*

Just finished breaking the motor. Going to add meth here soon and get a new tune.

Winters98GT · Jan 3, 2014

Nightfire said:
Car went under the knife last April.

Induction
Procharger D1SC
3.0" HOB pulley
Procharger Big Red race BOV (open)
Mishimoto 4-core intercooler
VMP HPX blow-through MAF
Diablosport MAFia
Autometer boost gauge
Autometer wideband gauge
Aeroforce interceptor gauge

Engine
Stage 3 ported/polished PI heads
5-angle valve job & gasket matched
Comp Cams beehive valve springs
MMR valve seals
MMR adjustable lifters
MMR Pro-Ti valves
MMR valve guides
MMR 4340 forged crank (8 bolt)
MMR aluminum flywheel (8 bolt)
Manley 4340 forged H-beam rods
Manley forged pistons (-18cc notched)
Moly rings
Clevite rod/main bearing
ARP 2000 fasteners
MMR water pump
MMR billet oil pump

Exhaust
MAC ceramic-coated longtube headers
MAC O/R Prochamber
MAC 3" Flowpath catback

Drivetrain
TCI StreetFighter 3200 stall torque converter
B&M Supercooler transmission cooler
Performance Automatic street/strip valve body
FRPP 4.10 gears

Fuel
FRPP Aviator 310lph fuel pump
Kenne Bell 40-amp Boost-a-Pump
Lethal Performance FPDM wiring upgrade
Lethal Performance fuel line upgrade w/ MMR rails
Siemens Deka 60lb injectors

Suspension
H&R SS springs
Maximum Motorsports LCA's
Maximum Motorsports FLSFC's
Maximum Motorsports CC plates
Maximum Motorsports sport series shocks/struts
Prothane total bushing kit

*breath*

Just finished breaking the motor. Going to add meth here soon and get a new tune.

Bring that beast to Pat G, or Mikey at GForce for that tune

Deleted member 38176 · Jan 3, 2014

Winters98GT said:
Bring that beast to Pat G, or Mikey at GForce for that tune

There's a local guy who is well-known (Im sure AlZ06 is familiar with him). He has a 7-sec turbo fox (turbovic), tht he's tuned himself along with a LOT of other fast cars.

Where are Pat and Mikey located?

SyberSaint · Jan 28, 2014

Nightfire,
I know the shop your talking about. Mike and crew are good peeps. and do good work. He tuned my 02 Saleen.

midnightdriver · Feb 15, 2014

Nightfire said:
Car went under the knife last April.

Induction
Procharger D1SC
3.0" HOB pulley
Procharger Big Red race BOV (open)
Mishimoto 4-core intercooler
VMP HPX blow-through MAF
Diablosport MAFia
Autometer boost gauge
Autometer wideband gauge
Aeroforce interceptor gauge

Engine
Stage 3 ported/polished PI heads
5-angle valve job & gasket matched
Comp Cams beehive valve springs
MMR valve seals
MMR adjustable lifters
MMR Pro-Ti valves
MMR valve guides
MMR 4340 forged crank (8 bolt)
MMR aluminum flywheel (8 bolt)
Manley 4340 forged H-beam rods
Manley forged pistons (-18cc notched)
Moly rings
Clevite rod/main bearing
ARP 2000 fasteners
MMR water pump
MMR billet oil pump

Exhaust
MAC ceramic-coated longtube headers
MAC O/R Prochamber
MAC 3" Flowpath catback

Drivetrain
TCI StreetFighter 3200 stall torque converter
B&M Supercooler transmission cooler
Performance Automatic street/strip valve body
FRPP 4.10 gears

Fuel
FRPP Aviator 310lph fuel pump
Kenne Bell 40-amp Boost-a-Pump
Lethal Performance FPDM wiring upgrade
Lethal Performance fuel line upgrade w/ MMR rails
Siemens Deka 60lb injectors

Suspension
H&R SS springs
Maximum Motorsports LCA's
Maximum Motorsports FLSFC's
Maximum Motorsports CC plates
Maximum Motorsports sport series shocks/struts
Prothane total bushing kit

*breath*

Just finished breaking the motor. Going to add meth here soon and get a new tune.

Wow, that is quite a transformation and alot of work. Be that thing is really fun/scary to drive. Congrats and unless you already posted - video ! (going to find your build thread)

marshall69 · Feb 15, 2014

Yeah, lovely to drive, not really scary as with 300HP it is not up there with the mega horsepower that the really keen guys seem to put in their modified cars these days.
You will see a video on my photobucket album. Also quite a bit of the individual custom made parts in the car.
http://s93.photobucket.com/user/voluntary/library/?sort=6&page=1

SyberSaint · Feb 16, 2014

Marshall69.. I went to your photobucket and I have to tell you that is a very impressive build.. Very nice...

marshall69 · Feb 16, 2014

Thanks mate, After a lifetime of working I wanted to get really absorbed in a restomod to make up for lost time. This was the retirement project and I enjoyed every minute in the garage. I may not be fast or efficient but with patience one can get there eventually.

Hello Stangnet - Been Awhile...

midnightdriver

Active Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Deleted member 38176

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

sneaky98gt

midnightdriver

Active Member

midnightdriver

Active Member

midnightdriver

Active Member

Deleted member 38176

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Deleted member 38176

SyberSaint

midnightdriver

Active Member

marshall69

Member

SyberSaint

marshall69

Member

Similar threads

Hello Stangnet - Been Awhile...

Active Member

Stangnet Facilities Maint Tech... Er... Janitor

Deleted member 38176

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Active Member

Active Member

Active Member

Deleted member 38176

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Deleted member 38176

Active Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency