• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP!! car idling like crap and stumbling

  • Thread starter Thread starter dbizzay
  • Start date Start date Apr 29, 2004
D

dbizzay

New Member
Apr 14, 2003
88
0
0
Surrey
Apr 29, 2004
#1
  • Apr 29, 2004
  • #1
Hey all,

I replaced my plugs and reset my timing to 6 degrees last week to prepare for my emmissions test. After replacing the plugs, the car has been running like ass. It idles really low (600 rpm). stalls sometimes after startup and when I get on it, it stumbles. Plus it stanks like a gas station. The plugs came pre gapped, and I didn't bump them on the heads, so I don't think its a problem with the plugs. The car ran fine before I swapped the plugs/wires..any ideas as to whats goin on here?

Thanks,
Derek
 
B

Biggeley

New Member
Mar 4, 2003
136
0
0
Apr 29, 2004
#2
  • Apr 29, 2004
  • #2
Check the plugs and wires!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Apr 29, 2004
#3
  • Apr 29, 2004
  • #3
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.dalidesign.com/hbook/eectest.html for more descriptive help
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes. Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.
 
D

dbizzay

New Member
Apr 14, 2003
88
0
0
Surrey
Apr 29, 2004
#4
  • Apr 29, 2004
  • #4
Pulled the codes, says something about the ECT sensor circuit.

The ECT sensor was recently replaced.
 
You must log in or register to reply here.

Similar threads

C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
610
Fox 5.0 Mustang Tech Jun 5, 2026
KRUISR
7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
597
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
321
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
F
Spark Plugs Caused Rough Idle & Driving
  • firevert
  • Sep 1, 2025
  • 2005 - 2009 Specific Tech
Replies
3
Views
385
2005 - 2009 Specific Tech Sep 3, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?