Help!! Code 136 !!

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#1

• Oct 26, 2007

• #1

o2 sensor shows lean condition on left bank.. I guess im not getting enough fuel to one side... ? what could be my problem?? thanks!

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Oct 26, 2007

#2

• Oct 26, 2007

• #2

If you want, clear the code, swap your O2's and see if the issue follows the O2. If so, replace the O2.

Good luck.

 

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#3

• Oct 26, 2007

• #3

HISSIN50 said:

If you want, clear the code, swap your O2's and see if the issue follows the O2. If so, replace the O2.

Good luck.

Click to expand...

Thanks, I'll give that a shot! I'll let you know what happens. But because of this issue My car is loosing a lot of power due to lack of fuel going where it needs to go. With my mods I can barely spin tires right now, and it use to be simple as u kno. I get more help here then sn95 forums. Your lucky if your thread even gets looked at.


p.s. Anyother opinions?

 

The Green GT

No 13 year olds are safe around me.

10 Year Member

Jan 8, 2006

1,269

19

99

Louisiana

Oct 26, 2007

#4

• Oct 26, 2007

• #4

Its always good to change both O2 sensors when one goes bad. The other is usually not far behind.

 

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#5

• Oct 26, 2007

• #5

The Green GT said:

Its always good to change both O2 sensors when one goes bad. The other is usually not far behind.

Click to expand...

Thing is, We pulled the left side one out being the driver side right?? It looked fine.. and my car just passed smog maybe 3-4 weeks ago.

 

The Green GT

No 13 year olds are safe around me.

10 Year Member

Jan 8, 2006

1,269

19

99

Louisiana

Oct 26, 2007

#6

• Oct 26, 2007

• #6

Im not saying that its bad, but when I had the same code, I changed them both.

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Oct 26, 2007

#7

• Oct 26, 2007

• #7

when i had that problem, the cause was a bad exhaust leak on only one side (stupid me forgot to completely tighten the x pipe to the collector).

 

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#8

• Oct 26, 2007

• #8

The Green GT said:

Im not saying that its bad, but when I had the same code, I changed them both.

Click to expand...

Was your car running like it had lost half its power?? I cant spin tires like it did 2 months ago. with my mods it should be as easy as 1 2 3! Also, any particular brand in o2 sensors... And do I just unhook the battery, put new ones in and done? Or do I need to clear the code somehow? My H-pipe also raddles sometimes and sounds like the left pass side Cat is burnig up inside.

 

The Green GT

No 13 year olds are safe around me.

10 Year Member

Jan 8, 2006

1,269

19

99

Louisiana

Oct 26, 2007

#9

• Oct 26, 2007

• #9

Mine was just getting REALLY bad MPG and throwing a CEL at WOT on the HWY sometimes. No really noticeable power loss, and I dont have cats.

 

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#10

• Oct 26, 2007

• #10

Igot the MAF sensor out too.. When I clean it do I just whipe down the tunnel or do I need to lightly touch the sensor its self with cue tip?

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Oct 26, 2007

#11

• Oct 26, 2007

• #11

LIGHTLY touch the sensor if you'd like. otherwise, you may get away w/ just spraying it w/ electrical parts cleaner.

 

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#12

• Oct 26, 2007

• #12

thanks I got it.. But my gasket for the screen is all tore up and not gonna seal.. RTV it?

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Oct 26, 2007

#13

• Oct 26, 2007

• #13

I'd NOT use RTV. I would not use anything that can break loose and get sucked up the intake tract. I recently had my screen/gasket delaminate (I like the screen's function but it doesnt fit the Mac CAI). I've been trying to think of a way to make the screen work without machining the CAI.

 

uNdErCoVeR

New Member

Sep 23, 2007

73

0

0

sacramento

Oct 26, 2007

#14

• Oct 26, 2007

• #14

Well turned out the problem was from a dirty Mass air sensor. The car spins second agin! Wahooo! thanks for the tips.