help finding Brake part...

downpiped · Dec 17, 2006

Hey guys...Im doin a front disk brake swap...using versailles calipers and granada spindles...get ready to powder coat all the parts...but Ive lost one of the two pieces that connect the caliper to the mount...its like a little shim that holds the caliper tight to the mount...Where can I find these parts new??? heres a link to a pic of the hardware...

http://www.mustangsteve.com/granadadiscs.html

scroll down half a page and its the caliper attaching hardware in the middle pic...

mustangdave · Dec 17, 2006

Go to Autozone and see if this is it:
http://www.autozone.com/servlet/UiB...ameters=|~With+key+retaining+screw&PageSync=5

If not, they may come with pads. Also, print out that pic and take with you. Should be no problem finding them.

yeloxr7 · Dec 18, 2006

You should be able to get a hardware kit for the calipers at any good auto parts store. It contains the two parts that hols the caliper in place, as well as the spring clip that goes on the inner pad.

If not available locally, I bet you could get these kits from Discbrakeswap.com. I received a pair of these kits from them when I ordered a pair of calipers.

help finding Brake part...

downpiped

New Member

mustangdave

My rearend needs a stud and two nuts.

yeloxr7

Member

Similar threads

help finding Brake part...

downpiped

New Member

mustangdave

My rearend needs a stud and two nuts.

yeloxr7

Member

Similar threads

Privacy & Transparency

Privacy & Transparency