Help installing aftermarket stereo

Your going to need a 2003+ Ford premium sound wiring harness and a double din mounting kit which you can purchase from crutchfield.com. To remove the radio, open up your center console and remove the two screws. Then lift up on the entire console and slide back a couple inches. Then, pull the side pieces off by grasping from the back and pulling forward out from the dash. After the two side pieces are off, remove the 7mm screws from around the dash. The hvac controls are very tight so you will have to disconnect them from the side by reaching up behind the dash from each side of the car and unhooking them. After they are off you can pull the dash off and then remove the 4 7mm screws holding the radio in.