Help me align my exhaust tips

I recently installed Pypes Violator axle back mufflers and ran into a problem that I believe a lot of people experience with aftermarket mufflers.

I read through TacoBill's How-To link several times and still cannot resolve this issue.

I've loosened the coupler at the H-pipe (2 bolts) to allow the intermediate pipe to be rotated. However this cannot resolve the issue of the tip extending from the bumper more than the passenger side. In addition, with the intermediate pipe completely "slack", I still cannot elevate the tip/muffler because the hangers/isolators prevent further adjustment.

Does anyone have any legitimate suggestions on resolving this issue? My passenger side exhaust tip is PERFECT/SPOT ON. The driver's side, OTOH, is totally out of whack. Depending on the angle you're looking from, the tip will appear noticeably "drooped" and protruding from the bumper. It's interesting that an OE replacement exhaust kit for my 00 Vic has the same problem with the driver side tip (rubs against the bumper cover).

Please help!

I bent the hangers on both mufflers and now they fit perfectly. I had to pull the intermediate pipe out just a tad to get both tips to be aligned in terms of depth.

My driver side muffler clamp wouldn't hold the muffler tight enough against the intermediate pipe. I think the notch wasn't cut wide enough to allow it to compress. I ended up using 2 pieces of feeler gauge to "shim it" in place.