Help me finish my combo

pb_paulie_b

Founding Member

May 19, 2001

894

0

0

Chaptico, Maryland

Dec 16, 2005

#1

• Dec 16, 2005

• #1

Hey guys. I wanted some opinions + some insite on finishing up my combination. I already have all the stuff in my sig plus link bar hyd. roller lifters and a shaft 1.6 roller rocker system.
Comp cams recomended their 282 nitrous HP .565 int.,.580 exh. hyd. roller cam with a 2800-6800 rpm range. I'm planning on getting a Vortech supercharger down the road.
Is this a good cam for 15 psi? Will my lifters handle the 6800 rpm? Should i get titanium locks and retainers? Will the supercharger handle that rpm? I know these are alot of questions, but i'm at stand still till i get some of these things figured out. Thanks...PB

 

pb_paulie_b

Founding Member

May 19, 2001

894

0

0

Chaptico, Maryland

Dec 16, 2005

#2

• Dec 16, 2005

• #2

Anyone?

 

maverick0716

Founding Member

Jan 12, 2002

3,924

0

56

Chilliwack, BC, Canada

Dec 16, 2005

#3

• Dec 16, 2005

• #3

If the lifters are stock (even new stock replacement), don't use them.....get something meant for high rpm.

 

pb_paulie_b

Founding Member

May 19, 2001

894

0

0

Chaptico, Maryland

Dec 17, 2005

#4

• Dec 17, 2005

• #4

maverick0716 said:

If the lifters are stock (even new stock replacement), don't use them.....get something meant for high rpm.

Click to expand...

Where can I find hi rpm roller lifters?

 

pb_paulie_b

Founding Member

May 19, 2001

894

0

0

Chaptico, Maryland

Dec 17, 2005

#5

• Dec 17, 2005

• #5

ttt

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Dec 17, 2005

#6

• Dec 17, 2005

• #6

Crane...

Were turning our Crane hydro. rollers to 7200 in a 408,with alot larger cam.

And our previous 357 had the same lifters in it (yes,our 408 has the same lifter that came out of the 357,so we got about 3000 miles on them!)And thaty motor would turn 6800rpm with a Crane cam similar in specs to a TFS stage 2.

And really,I dont see how new stock ones would be a big problem,Im mean they would have to pump up terrably easy.

 

pb_paulie_b

Founding Member

May 19, 2001

894

0

0

Chaptico, Maryland

Dec 17, 2005

#7

• Dec 17, 2005

• #7

I thank you for taking the time! Will a vortech v1-sc hold up to 6800 rpm?

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Dec 17, 2005

#8

• Dec 17, 2005

• #8

pb_paulie_b said:

I thank you for taking the time! Will a vortech v1-sc hold up to 6800 rpm?

Click to expand...

Yea...with a larger blower pully.

 

maverick0716

Founding Member

Jan 12, 2002

3,924

0

56

Chilliwack, BC, Canada

Dec 18, 2005

#9

• Dec 18, 2005

• #9

bluevenom867 said:

Crane...

Were turning our Crane hydro. rollers to 7200 in a 408,with alot larger cam.

And our previous 357 had the same lifters in it (yes,our 408 has the same lifter that came out of the 357,so we got about 3000 miles on them!)And thaty motor would turn 6800rpm with a Crane cam similar in specs to a TFS stage 2.

And really,I dont see how new stock ones would be a big problem,Im mean they would have to pump up terrably easy.

Click to expand...

Well they're meant to not go above 6500 rpm.......So they may or may not fail, but I personally wouldn't take the chance.